Apexi Intake and Non-Sequential Twins
08-09-01, 08:33 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Baton Rouge, La
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Apexi Intake and Non-Sequential Twins
Does anybody have pics or tips for me before I install this Intake. The damn instructions are all in Japanese. I also have an Efini Y-Pipe just installed. Can I cap the Y-Pipe?
11-07-01, 07:52 AM
#5
It's never fast enough...
Join Date: Feb 2001
Location: Miami - Given 1st place as the POOREST city in the US as per the federal government
Posts: 3,760
Likes: 0
Received 3 Likes
on
3 Posts
Guys, an intake is an intake. The hoses must lead soemwhere. The BOV hoses really doesn't matter where it attached to on the intake, the airpump hose should be attached after the air filter, and the ABV hose doesn't really matter where it attaches to,either. Even though it doesnt matter where it attaches, they really SHOULD be installed after the filter to prevent any minor dirt from finding their way in there.
If you connect a BOV hose where the airpump hose was at, you really aren't going to break anything. So as long as you have no leaks into the turbo, you really can NOT damage anything by crisscrossing hoses that are attached to the intake.
If you connect a BOV hose where the airpump hose was at, you really aren't going to break anything. So as long as you have no leaks into the turbo, you really can NOT damage anything by crisscrossing hoses that are attached to the intake.
Thread
Thread Starter
Forum
Replies
Last Post