3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

apexi gt spec exhaust

Thread Tools
 
Search this Thread
 
Old 11-29-01 | 03:25 AM
  #1  
suprfast's Avatar
Thread Starter
Rotary Enthusiast
 
Joined: May 2001
Posts: 909
Likes: 1
From: home
apexi gt spec exhaust

hey guys, ive looked everywhere and i cant find a picture of the gt spec exhasut on any rx7. if oyu have one, email me it. i really want to see how it looks. all i ever get is the exhaust alone and i see a bend in it. does it exit out the side. is this the highest HP exhaust available for the price. is greddy a better buy?
kris
Old 11-29-01 | 03:45 AM
  #2  
RX-7 GT's Avatar
HyperREV.com
 
Joined: Mar 2001
Posts: 1,162
Likes: 0
From: Oregon
i dont have any pics. but i can tell you its better than any greddy. i dont think there is currently any greddy exhausts running 3.74" like the gt spec.

so with price in mind and looking at all the greddy's, the gt is the best bang for buck price.

the highest hp exhaust avaliable is the hks titanium. 4" no cats. but its over 1k$.

i would go gt spec, or hks if money isnt an issue.
Old 11-29-01 | 05:23 AM
  #3  
Jsquared's Avatar
Full Member
 
Joined: Nov 2001
Posts: 195
Likes: 0
From: Raleigh, NC (NC State)/Charlotte, NC
how good is the APEX'i dual N1? i haven't heard it or heard about it, but i think its one of the best-looking exhausts out there on the FD (bigger without being ricey, retains the dual-tip design of the OEM exhaust)


Last edited by Jsquared; 11-29-01 at 05:26 AM.
Old 11-29-01 | 06:36 AM
  #4  
RX7 RAGE's Avatar
Bann3d. I got OWNED!!!
iTrader: (22)
 
Joined: Feb 2001
Posts: 5,015
Likes: 66
From: San Diego, CA
pics of the exhaust and hood on my car







Here's the apex gt spec exhaust on my car when I had it. I now have an HKS TI exhaust with 4" piping. That's the faspac hood. Sorry for the bad pictures. I'll try to get better ones next time.
Old 11-29-01 | 11:06 AM
  #5  
wptrx7's Avatar
Newb Photog
 
Joined: Jul 2001
Posts: 2,171
Likes: 0
From: new jersey
i have the apex gt exhaust but someone told me it might be the apex n1, how can you tell? i did measure mine, it started at three inches than went to a little over three is that the gt spec. the reason this came up was because he brought his rx7 over and said that he had the gt spec, except his esxhaust didn't bend to the side like mine, but had a bigger opening, it looked like the apex dunk, but i didn't think they made that for rx7s. i like my exhaust and i do believe it is the apex gt (i paid $500 for it including shipping) and all the info including the box said it was the the gt spec. i even went to a friends house who had the gt spec on his supra and they looked exactly the same, the picture above looks the same other pictures i've looked up including on apex's website matches up. what do you think?

luigi
Old 11-29-01 | 11:46 AM
  #6  
Jason's Avatar
The one
iTrader: (5)
 
Joined: Jul 2001
Posts: 3,862
Likes: 4
From: Fort Worth, TX
The GT Spec and N1 Look identical other than the stainless piping going back to the cat on the GT.
If you got a silencer with the exhaust then its a GT spec. The N1 does not come with one.

Jason
www.rx7store.net
Old 11-29-01 | 12:40 PM
  #7  
wptrx7's Avatar
Newb Photog
 
Joined: Jul 2001
Posts: 2,171
Likes: 0
From: new jersey
i got the gt spec (it came with the silencer). so do they make a apex dunk for a fd.

luigi
Old 11-29-01 | 01:25 PM
  #8  
suprfast's Avatar
Thread Starter
Rotary Enthusiast
 
Joined: May 2001
Posts: 909
Likes: 1
From: home
would putting the silencer on help out TQ for autoXing. this applies to the gt spec exhaust. i want to have a high flowing exhaust, since that is what is needed for turbos, but i want good TQ for coming out of the sharp corners. any insight.
kris
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 04:30 PM
sYnth.
Build Threads
0
08-19-15 07:27 PM




All times are GMT -5. The time now is 05:31 PM.