3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Apexi AVC-R vs Blitz SPC-ID??

Thread Tools
 
Search this Thread
 
Old 03-04-05 | 06:56 PM
  #1  
André_J's Avatar
Thread Starter
Junior Member

 
Joined: Sep 2004
Posts: 42
Likes: 1
From: Norway
Apexi AVC-R vs Blitz SPC-ID??

Looking for a new boostcontroller to my FD now. Was originally planning to buy a Apexi AVC-R, but someone said that it wasn`t that good on a twin turbo FD. He recomended Blitz SPC-ID istead, which of course are more expensive....

What are your recomendations??? Need help... There aren`t many "FD experts" over here.... I need to easily tune (with one touch) down the boost pressure, if pulled over by the police....

My car has the "standard" improvement, exhaust, IC, CPU and filter....

Andre
Old 03-04-05 | 07:08 PM
  #2  
1FooknTiteFD's Avatar
Ghost Ride the Whip
 
Joined: Mar 2001
Posts: 1,467
Likes: 1
From: Foster City, CA
If you are going to stick with the stock twin sequential turbo setup, I think your best bet is actually the Profec B.

I have the SBC ID for my single turbo FD, but on the manual it even says that it doesn't work well with sequential twin turbos.
Old 03-04-05 | 08:50 PM
  #3  
crazyrx7's Avatar
Big Daddy!!!
 
Joined: Jul 2002
Posts: 1,194
Likes: 0
From: Edmonton, Alberta, Canada
I have the blitz and it works great with the sequential system. You can set how fast the wastegate opens and there is 4 channels you can program. The auto setting is only supposed to be used on single turbo cars.

R.K.
Old 03-04-05 | 09:11 PM
  #4  
Scrapiron7's Avatar
STi Boxer power!
 
Joined: Apr 2001
Posts: 2,160
Likes: 0
From: Austin, TX
I'm also using the Blizt SBC-id on stock twins. I'm not sure why anyone would think it doesn't work well on them...
Old 03-05-05 | 03:43 AM
  #5  
1FooknTiteFD's Avatar
Ghost Ride the Whip
 
Joined: Mar 2001
Posts: 1,467
Likes: 1
From: Foster City, CA
crazyrx7 is right. I am looking at my manual now and it says that auto mode wont' work with twin turbo or sequential turbo, but manual mode should be fine. I personally never used it on the twin turbo before, but I just heard the profec B is good for sequential twins
Old 03-05-05 | 06:22 AM
  #6  
TT_Rex_7's Avatar
Rotary Enthusiast
 
Joined: Jun 2004
Posts: 1,457
Likes: 0
From: Gallatin, TN
Heres a write up on the Apexi AVC-R.

http://www.rx7guru.com/rx7boostcontroller.htm

-Alex




All times are GMT -5. The time now is 05:33 PM.