anyone have a rhd fd?
#1
anyone have a rhd fd?
Im in the process of building a 94 fd that was hit in the front, and joining it with a 99 fd. anyone else seen or have a right hand drive FD registerd in the US?
#4
I was interested in it but I'm too deep in project cars. People are paying $1800 for 99 bumper conversions and $2K for 99+ turbos. Figure you get the trans, motor, big front brakes, 99+ fans, Efini y-pipe and all the body panels.
Not really that bad of price...
Not really that bad of price...
#6
yeah i bought that clip from ebay, but i payed way less for it ($5000)... it was pretty clean, only had 20k miles on it, came with big brakes, bilstien shocks, abs brain, nardi steeing wheel with air bag, really clean dash, entire black carpet, and even got the jdm doors, complete. its at the body shop now, i stripped the whole car and the clip, and theyre joing the two pieces. The motor is already apart, and im almost done porting it, i already have an hks exhaust, and ill make an intake for it when i start putting this thing back together
Trending Topics
#8
the car will be as strong as a stock unmodified car, i had them drill out all the stock spot welds, so when it goes back together, it will be just like factory. it will be registerd as a 94, and it will have a salvage title, the 94 was hit in the front end, i dident want to cut up a clean fd, so i used a crashed car.
#13
Don't waste your time trying to upload pics onto the forum. It sux.
Go to http://www.villagephotos.com/
Free, lots of space, pics can be any size, etc. Then come to the forum, and post the link to the pic using the "IMG" button above the text box, and it'll come out fine =)
Go to http://www.villagephotos.com/
Free, lots of space, pics can be any size, etc. Then come to the forum, and post the link to the pic using the "IMG" button above the text box, and it'll come out fine =)
#14
does this work? here are some pics of my shop and my car
http://www.villagephotos.com/pubgallery.asp?id_=753595
http://www.villagephotos.com/pubgallery.asp?id_=753595
#19
Okay let me get this straight...
Trying to register a full JDM RX-7 isn't possible and illegal without the required crash test results etc.
However, welding on a JDM front clip to a domestic frame and essentially turning it into a JDM RX-7 isn't illegal and completely easy to register as the same?
Woa..
Trying to register a full JDM RX-7 isn't possible and illegal without the required crash test results etc.
However, welding on a JDM front clip to a domestic frame and essentially turning it into a JDM RX-7 isn't illegal and completely easy to register as the same?
Woa..
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 04:25 PM
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 10:25 PM