supraturbo1987

iTrader: (4)

Okay, I did the simplified sequential and removed most emissions. I am still getting a code 30, 33, 38, 39. I have put 330 ohm resistors in the connectors that plug intot he Selonoids on the rack, but I just realized that the 3 connectors that plug into the ACV that I removed don't have any resistors...am I stupid, or will those need 330ohm resistors as well?

Trev

Mahjik

iTrader: (1)

I don't believe you need any resistors onto the connections directly to the ACV. IIRC, there is no specific ACV code, only codes for the solenoids which the ACV uses.

Monkman33

iTrader: (28)

So are the solenoids removed? If so, what resistors would you want then? or would you have to do something different?

topspeed7

u need to put resistors on all of them, i just did mine. make sure the resistors wattage are the highest u can get.

supraturbo1987

iTrader: (4)

I ended up connecting the connections from the ACV (they unscrew) and pitched the ACV itself and taped up the connectors. no codes