DefBringer

stock motor with:

current mods: m2 dp, racing beat catback

adding next week: apexi power intake and Power FC tuned for all these mods.


1)Roughly how much total HP might I be making after these mods?

2)intake+ Power FC = about how much HP over what I have right now?


Thank yas!!

JoeD

as of right now, your probably running about 245-250 ish RWHP.

with the PFC and intake with boost up to 12 psi, im guessin around 280 RWHP.

Tad

really, i thought intake/dp/exhaust/computer
would put you at or over 300rwhp

but then i dont know jack, except what i've heard.

BrianK

I've heard that an IC needs to be added to that combo in order to get over 300. I just spoke with a guy with intake, DP, catback, IC, & rempped ECU (running around 13psi) getting 310 rwhp.

kwikrx7

I read an article in Sport Compact Car about an FD doing the Power FC. They started with a FD that had intake and exhaust - he had 242 rwhp. When they added the PFC (untuned) they got 269 rwhp - a dp will add 13-20 rwhp so between 280 and 290 rwhp or 330-340 at the flywheel - sweet! Have fun!

DK

iTrader: (5)

$4

rx7speed811

...i don't get it.

SPOautos

I'd say at 12 or so psi youd be right around 278-280 with all your mods.....add a midpipe and you'll be at 300-310. Then from there you'd add a IC and turn the boost up to 13-14 and you'd be pushing about 350.

I'd go ahead and get the midpipe so when you get your PFC tuned it will be for a midpipe. If you want to make really good power you'll eventually have to get a midpipe. I guess you could go ahead and have the PFC mapped for mp eventhough you dont have one you'll just be running **** rich until you install the mp.

Later,