RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   99 Fans p/n? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/99-fans-p-n-370707/)

turbojeff 05-07-05 01:16 PM


Originally Posted by quicksilver_rx7
JM1FD3311P0276998 :bigthumb:

Not an actual FD VIN.

quicksilver_rx7 05-07-05 01:25 PM

no shit

user 9348703 05-07-05 06:58 PM

quicksilver_rx7 -----The reason JT-Imports never sold them is because the ones from the 99-02 RX7s, were about $300 a pop, so we had only made available the fan blades themselves. The RX8 motors are 2 different types and 2 different PNs.

Herblenny 02-20-06 11:34 PM

Sorry to bring this thread back up... I need to know which fans pull more air, 7 or 5 blade??

I was told by someone that between 93 4 vs 5 blade, 4 pulls more air. I'm now thinking about buying couple of these 7 blades if they pull more.. Any input from some vets would be appreciated!

EFS.O 02-21-06 02:25 AM

I have installed the whole 99 assembly (fans + motors),and the biggest difference i noted,is the lower noise level.The fans seem to pull more air,but not too much,maybe a 10% compared to the 93's...

dubulup 02-21-06 07:20 AM

total price for fans and motors?

any reason not to get two 5's or two 7's? Are they for speed reasons (lo, med, hi)?

Herblenny 02-21-06 09:44 AM

Well, Far as my understanding is that Mazda put 4 and 5 blade configuration because of the location of SMIC. I believe 4 blade is located under the SMIC and pulls more air than the 5 blade. I'm guess its the same thing with 99+ 5 and 7 blade configuration.

Also, reading this thread and response I got in the past, the 99 motors draw less current. I guess my thing is, I'm not going to have a SMIC (I have FMIC) and the radiator will be verticle. I would like to put higher CFM fans if I can as I'm having hard time channelling air.. But if 4 blades pull more air (current set up), then I'm not going to worry about getting the 99+ blades.

EFS.O 02-21-06 09:58 AM

Total price together with a SARD radiator was 150 bucks(used):jump:

tekno62 02-21-06 01:14 PM

Im glad you did.. I found some new info for my FD.



Originally Posted by herblenny
Sorry to bring this thread back up... I need to know which fans pull more air, 7 or 5 blade??

I was told by someone that between 93 4 vs 5 blade, 4 pulls more air. I'm now thinking about buying couple of these 7 blades if they pull more.. Any input from some vets would be appreciated!


audiobot7 02-21-06 01:55 PM

I have the 5 5 blades.

Herblenny 02-24-06 02:31 PM


Originally Posted by audiobot7
I have the 5 5 blades.

Which 5 5 blades?? 93 or 99?

MILOS7 06-09-09 05:13 PM

Bump for 99' fan motor part number...

EFS.O 06-10-09 05:01 AM

motor : N3G1-15-150

7 blade fan : RF1S-15-140

5 blade fan : RF2A-15-140

front fan bolt : B595-15-T59

Be aware that the cable connectors are different from the 93-95,you 'll have to use the old one.

MILOS7 06-10-09 06:00 AM


Originally Posted by EFS.O (Post 9278964)
motor : N3G1-15-150

7 blade fan : RF1S-15-140

5 blade fan : RF2A-15-140

front fan bolt : B595-15-T59

Be aware that the cable connectors are different from the 93-95,you 'll have to use the old one.


any place to buy theses parts (motor price ?)

difference between this 99 ' set up and 93' OEM ?

Thanks

billyboy 06-10-09 06:20 AM

Motors were about 22,000 yen each prior to a couple of recent sizeable Mazda price increases, probably best searching Yahoo for 2nd hand, complete assemblies.


All times are GMT -5. The time now is 10:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands