*Post yo wheels thread* 2020 edition
The following users liked this post:
gracer7-rx7 (05-04-20)
The following 2 users liked this post by ZE Power MX6:
asesereker (05-16-20),
Tim Benton (05-05-20)
The following users liked this post:
ChrisNZ (06-20-20)
#31
I think if I do what I wanted it goes from the 17x8.5+35 that it is to 17x10.5+22. Might have to do to 17x10 to make it +28 or so. That should be alright. 0.5 in stagger at that point, not bad. If my math is right. I would like to avoid excessive camber wear, if possible. 265/40 is what I intended to run on them.
The following users liked this post:
XanderCage (01-07-21)
#33
RX-7 Bad Ass
iTrader: (55)
Racing Beat wheels, one of only 2 sets I know of in the country. Made by Racing Hart Japan for RB back in the early 90's.
Real 3-piece wheels, 17x8 front, 17x9 back, +35 offset. Fit like a glove, they were designed to fit the FD.
Don't get me started on what I went through to get the center caps!
Dale
#34
Senior Member
iTrader: (5)
Racing Beat wheels, one of only 2 sets I know of in the country. Made by Racing Hart Japan for RB back in the early 90's.
Real 3-piece wheels, 17x8 front, 17x9 back, +35 offset. Fit like a glove, they were designed to fit the FD.
Don't get me started on what I went through to get the center caps!
Dale
Real 3-piece wheels, 17x8 front, 17x9 back, +35 offset. Fit like a glove, they were designed to fit the FD.
Don't get me started on what I went through to get the center caps!
Dale
#35
What kind of tires are the 265s? Sadly it seems as though 265/40-17 is extremely uncommon... I see that Goodyear has an "Eagle F1" but I feel like you never really hear people talk about Goodyear? There is also the Bridgestone Potenza S007A that Tire Rack claims to have, but Bridgestone's website doesn't think exists.
The following users liked this post:
jimbo1184 (06-18-20)
#37
TANSTAFL
iTrader: (13)
I appreciate you bringing these wheels to my attention. At a bare minimum they were a less expensive way to test out these offsets and tire sizes. Ended up really liking them to the extent that i bought another set to put A7's on.
#38
What kind of tires are the 265s? Sadly it seems as though 265/40-17 is extremely uncommon... I see that Goodyear has an "Eagle F1" but I feel like you never really hear people talk about Goodyear? There is also the Bridgestone Potenza S007A that Tire Rack claims to have, but Bridgestone's website doesn't think exists.
The following 3 users liked this post by 7_rocket:
#40
Full Member
iTrader: (3)
Thanks, Blue! I completely agree. I almost pulled the trigger on some Fikse or Volks, but ultimately I decided I didn't want to stress about cone marks, curb strikes, and pothole hits on a set of high end wheels.
I appreciate you bringing these wheels to my attention. At a bare minimum they were a less expensive way to test out these offsets and tire sizes. Ended up really liking them to the extent that i bought another set to put A7's on.
I appreciate you bringing these wheels to my attention. At a bare minimum they were a less expensive way to test out these offsets and tire sizes. Ended up really liking them to the extent that i bought another set to put A7's on.
The following 2 users liked this post by Natey:
alexdimen (05-11-20),
sharingan 19 (03-04-22)
#43
I'm in the process of trying to roll my fenders and struggling to figure out how much is enough. I've never rolled a fender before.
The following 5 users liked this post by jonahau:
keeptrying56 (06-22-20),
Macer (01-18-21),
Onebroke7 (01-24-21),
sharingan 19 (03-04-22),
Wompa164 (04-13-23)
#45
Racing Beat wheels, one of only 2 sets I know of in the country. Made by Racing Hart Japan for RB back in the early 90's.
Real 3-piece wheels, 17x8 front, 17x9 back, +35 offset. Fit like a glove, they were designed to fit the FD.
Don't get me started on what I went through to get the center caps!
Dale
The following 15 users liked this post by DFunn:
alexdimen (05-11-20),
arprequest (06-07-21),
blk91fc3s (07-23-20),
Esser (01-24-22),
FerrousBueller (05-31-20),
and 10 others liked this post.
#48
RX-7 Bad Ass
iTrader: (55)
I refurbished them when I got them and didn't bother with the stickers, it was a little busy with the stickers on 1 spoke and on the wheel lip as well.
Dale
#49
TANSTAFL
iTrader: (13)
Man... I'd love to. With Coronavirus, both adults working from home, and two kids under 3 in the house with no daycare I get out for a random highway blast or tune session maybe once a week in the evening if I'm lucky. Maybe once all this mess blows over I'll have a little more time. We could meet up at the first VMSC auto-x event... whenever that is going to be. I plan to be there.
Nice FD and wheels btw!
Certainly. I had never used a roller either. I would say they let you know when enough is enough. Mine kind of just... stopped rolling under and got stiff. Take a look...
https://www.rx7club.com/3rd-generati...nders-1132416/
Nice FD and wheels btw!
@alexdimen can you post some pics of how rolled your fenders are and how you shimmed the fender liners?
I'm in the process of trying to roll my fenders and struggling to figure out how much is enough. I've never rolled a fender before.
I'm in the process of trying to roll my fenders and struggling to figure out how much is enough. I've never rolled a fender before.
https://www.rx7club.com/3rd-generati...nders-1132416/
Last edited by alexdimen; 05-11-20 at 01:37 PM.
The following users liked this post:
gracer7-rx7 (05-11-20)
The following users liked this post:
alexdimen (05-12-20)