Post Some Pics of your FD! :D <- Pics of your car go in this thread!!
deal with it
iTrader: (10)
Join Date: Jun 2008
Location: California
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
I
iTrader: (2)
damnit, why did you have to go and do that???? I was from what I know the only one when I put mine on last year, and now you, aghhh!!!
Car looks sick, especially with my good idea on the back haha, jk.
Ill post up a pic of mine, our badges should be pretty much in the same place because im assuming you used it to cover up the mazda holes as well.
Car looks sick, especially with my good idea on the back haha, jk.
Ill post up a pic of mine, our badges should be pretty much in the same place because im assuming you used it to cover up the mazda holes as well.
Thanks Kai glad you like...gotta catch up with you soon!
Nope, I did have a cheap mesh style set (HP wheels) in completely the wrong size, but I have good friends that helped me see the light about my wheels! I am also loving my new tires, went from Falken 451's to Dunlop Direzza Star Z1's
Here is an old pic from last summer....
Uncle Rico
iTrader: (5)
Snkydvl - What size tires do you have squeezed on there? Any fender modifications? Looks good
Polishing Fiend
iTrader: (139)
Very nice Damari! Wheels look nice. Is the name plate a combination of CX-7 and RX-8 pieces?
Rich, Well DONE! I now need to find another 18hp to catch up. Maybe the GZ LIM sitting in a box in my garage will help BTW what was your AFR's and were you using pump for the 20psi pull?
Regards,
Crispy
Rich, Well DONE! I now need to find another 18hp to catch up. Maybe the GZ LIM sitting in a box in my garage will help BTW what was your AFR's and were you using pump for the 20psi pull?
Regards,
Crispy
bow leggin'
iTrader: (25)
Senior Member
iTrader: (7)
Join Date: Aug 2007
Location: winnipeg
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
I would have liked to have gotten the 7 closer with the dash inside, but because of the mazda holes, and trying to cover up as much of the old logo mark as possible (sun fading) I had to position them there. I also think with the 7 spaced further apart it lessens just how slightly larger the 7 is compared to the rx.
Garage Hero
iTrader: (93)
I
iTrader: (2)
Thank you Captain OBVIOUS...one thing at a time, not sure about lowering it anymore since the roads are crappy with our NE winters. Spacer in rear...YES, I do need!
And maybe she is finally becoming photoshoot worthy?!
Thanks Tom! I think 20B 3 rotor should just lower the dash a bit.
don't pick a fight with a girl! BTW - all of the holes are covered on mine with this placement.
Hey Mike, I am running Dunlop Direzza Sport Z1 Star Spec's rated 200 A-A
Original Gangster/Rotary!
iTrader: (213)
AFRs were mid 11s with the water injection. The 20 psi tune was on 93 Octane with the water injection..... I can use it all day, every day
Car looks great D, the wheels look even better than I expected
Last edited by GoodfellaFD3S; 04-13-10 at 09:44 PM.
Senior Member
iTrader: (7)
Join Date: Aug 2007
Location: winnipeg
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
I wonder if the mazda badge changed over the years, because I think my dash is covering a hole, but now im doubting myself and considering removing it...
I feel like my car is copying yours, its a good thing my old rims havent sold yet or I too would have had work emotion xd9's on my car with direzzas.
And since this is a pic thread, the last blurry cell phone pic of my old rims.
Senior Member
iTrader: (1)
Join Date: Mar 2008
Location: Cleveland, Ohio
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Calling all ROTARDS!!!
My FD is gone. DEAD and Gone.
The only way I can keep her alive is if I can find a RHD shell / roller located in the USA.. I'm putting out a WANTED
If anyone can help me with finding a decent RHD shell or roller I will paypal them $500. NO BS.
I hope someone can help me. I found one in Toronto but getting it across the border is well.. hard to say the least.
My FD is gone. DEAD and Gone.
The only way I can keep her alive is if I can find a RHD shell / roller located in the USA.. I'm putting out a WANTED
If anyone can help me with finding a decent RHD shell or roller I will paypal them $500. NO BS.
I hope someone can help me. I found one in Toronto but getting it across the border is well.. hard to say the least.
Senior Member
iTrader: (1)
Join Date: Mar 2008
Location: Cleveland, Ohio
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Nothing. Just found a nice rhd cym for cheap two years ago and had to buy it. The FD is my dream car and I was lucky enough to have it at 22.
A LHD roller will be too expensive for me to convert to put my parts on it and the ideal way for me to "restore" my car is to get another RHD shell and swap all my parts.
A LHD roller will be too expensive for me to convert to put my parts on it and the ideal way for me to "restore" my car is to get another RHD shell and swap all my parts.
Space cadet
iTrader: (78)
ouchh... sorry to hear that Max..
idk if its something your interested in .. but the local (LOS ANGELES) craigslist is always selling rhd fd shells and theres a few import spots near my house that import shells as well...
idk if its something your interested in .. but the local (LOS ANGELES) craigslist is always selling rhd fd shells and theres a few import spots near my house that import shells as well...