RE-Amemiya

accel junky: VERY clean!!!

rx7rcer09

accel junky what type of exhaust is that ive never seen that

accel junky

Thanks! That is what I strive for.

It's custom fabbed. Trual dual, with H pipe and twin magnaflow mufflers angled vertically instead of laying flat. Oh, and its not spouting gases from a rotary, if that helps the mental image

FDNena

iTrader: (2)

accel junky, your car looks beautiful. I think it is more rare to see them this close to untouched! Keep it that way!!

GoodfellaFD3S

iTrader: (213)

Hm, those rears look much wider than 265s....maybe it's an optical illusion due to the low offset of the rear wheels.

I'm planning to mount 18x9 +38 and 18x10 +44 Fikse Profil 5s soon, along with 245/35 and 275/35 or 285/30 tires. Nice pics to see given the setups are pretty similar.

You don't have any rubbing issues, fender unrolled correct?

P.S. Car looks great

matty

any pics of new rims?

RXtacy

iTrader: (7)

Post pics!

splitzo

neit_jnf You got any pix of you interior? Lookin at your car I wanted to see what your seats look like. They look like a dark red very clean.

Uncle Hungry

iTrader: (2)

I will I'm holding out, should be all done in about a month!

accel junky

Thanks! I'm done with aesthetic mods as it is. I love a stock body with lip only. Did the same thing on my MKIV Supra.

They are 265s for sure. Maybe the yoko's run wide? They look pretty good for 265s from behind. You should be good on those fronts. I don't rub at all in the front or rear, but rear's have a slight roll (maybe 30 degree from stock).

John99RB

Just took some pics of my baby and thought i should share them with you guys but sorry to say the car isn't working properly right now and i can't find out what's wrong with it

Gorilla RE

iTrader: (1)

Mmmm stock.....

Fred Villamor

rx7rcer09

^ was that car hit a lot of the lines are not even close ex passenger fender to the door

Gorilla RE

iTrader: (1)

Even if it was I doubt that's the main problem....After market fenders, hood, lights and bumper all from diff makers + most body shops =

-J

finneymc

finneymc

DMoneyRX-7

iTrader: (2)

finneymc, your FD is the ****. But a few criticisms. Paint the hood, get coilovers, and larger rims. Other than that...its perfect.

finneymc

thanks!

the hood is CF i just need to refinish, i am NOT going to drop it no way no how but thanks for the suggestion and i kinda like the rims and since i won't drop it i think 17's are as high as i am going.

Thanks again for the complement Dmoney!

DMoneyRX-7

iTrader: (2)

It's CF? Wow, It looked like Fiberglass. Sorry. Well what kind of suspension are you running?

finneymc

yeah i know, the guy before me didn't know how to take care of CF, so i am going to have to refinish and hopefully it comes out okay. I am not sure what suspension it has, i am going to get under it tomorrow actually for the first time. I believe that it is stock. I want to replace it with something that is stock ride height, but better than stock shocks and stuff. any suggestions? (for stock height)

DMoneyRX-7

iTrader: (2)

i mean, you could stick with stock struts and go with some eibach pro's. It only lowers it in the rear about an inch and the front about half an inch. Probably the closest springs you can get to stock ride height. If you are wanting to replace the struts then you could just go with Koni Gas Struts.

finneymc

i dont want to lower it at all though.... Is there any shocks that i could get that would just replace the stock ones? i am not looking to replace the struts/springs if i don't have to. the only reason that i am looking to replace the shocks is because the ride is extra rough right now.

twomucboost4u

iTrader: (9)

finneymc

clean *** 7 but i don't really like that half black look, why did you go that way?

o i see it is CF wow that must be one really light 7!!!