Post Some Pics of your FD! :D <- Pics of your car go in this thread!!
#6501
4 rotor 964 lol
iTrader: (1)
Join Date: Sep 2003
Location: SoCA/ MA
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
the JDM RE-Amemiya headlights of that model are actually just foglights put into flush mounts, and won't light the road for ****. you really want to retrofit projectors and HIDs for it to be worth anything. i own them and plan on putting in some HIDs
#6503
They are 17x10 +18
#6506
Racing Spirit
iTrader: (2)
Join Date: Jun 2007
Location: NNJ
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
haha yea you got it right it's rhd!
I was looking for the right rx7 for a long time and was lucky enough come across this car with the ad-gt kit in Kobe, but still needed some work. Cool thing is the car's owner took it to stillway to be built so there's alot of one off parts made for it. First owner made it into a drag car, so there's alot of drag compenents (line lock, skyline gtr rear driveshafts..) and the second owner built it for the track, I'm now the third.
used to look like this when i first got it
If you have any questions about the setup you can give me a pm!
I was looking for the right rx7 for a long time and was lucky enough come across this car with the ad-gt kit in Kobe, but still needed some work. Cool thing is the car's owner took it to stillway to be built so there's alot of one off parts made for it. First owner made it into a drag car, so there's alot of drag compenents (line lock, skyline gtr rear driveshafts..) and the second owner built it for the track, I'm now the third.
used to look like this when i first got it
If you have any questions about the setup you can give me a pm!
Last edited by Mahjik; 11-14-07 at 11:28 PM. Reason: Don't quote ALL the pictures...
#6507
Full Member
iTrader: (1)
Join Date: Nov 2003
Location: K-town
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
My car is getting close to being finished. I just sit the UIM, throttle body, and elbow on to get an idea. Hopefully it will be done in a week or two. I will also attach a pic of the car the engine is going in. The pics do not do the polishing job justice. Everything under the hood will be black, gunmetal, or polished/chromed.
1/2 Bridge (thanks rotaryresurrection!)
ITS T-66
850cc's & 1600's with twin walbros
Greddy Ti exhaust
Power FC
'99 Spec front
1/2 Bridge (thanks rotaryresurrection!)
ITS T-66
850cc's & 1600's with twin walbros
Greddy Ti exhaust
Power FC
'99 Spec front
#6510
Lounge amateur **D
Join Date: May 2006
Location: socal
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Hi everyone, I'm new to this site, & I thought I'd post some links to pics of my car before I get into the forums in detail..
http://img155.imageshack.us/my.php?i...sc00156cp1.jpg
http://img521.imageshack.us/my.php?i...sc00164zl0.jpg
http://img88.imageshack.us/my.php?image=dsc00152go9.jpg
http://img85.imageshack.us/my.php?image=dsc00154sy2.jpg
Do those links work ok? Other forums I'm involved with, just make them hyperlinks.. Hope this forum is the same?
http://img155.imageshack.us/my.php?i...sc00156cp1.jpg
http://img521.imageshack.us/my.php?i...sc00164zl0.jpg
http://img88.imageshack.us/my.php?image=dsc00152go9.jpg
http://img85.imageshack.us/my.php?image=dsc00154sy2.jpg
Do those links work ok? Other forums I'm involved with, just make them hyperlinks.. Hope this forum is the same?
Nice 7!
#6513
Junior Member
Join Date: Jun 2007
Location: Bergen, Norway
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Hi all! Øyvind from Norway here
Thought i`d take the time to post a few pictures of my FD
1993 FD Touring, california import, resprayed 6 months ago in Spirit R titanium grey, 99spec. front, VIS C-F hood, 9 and 10x18 rims from RO_JA by rays wheels, on 245 and 275/45-18s, aftermarket drilled discs front and rear, greddy airfilters, 3" catback exhaust, HR lowering springs and yellow Koni shocks. No performance mods to talk about as of now, the engine is rebuildt with 8000 miles on the clock after rebuild.
I had to raise the car alittle cause the rims had juuuust the tad wrong offset, will fix this by massaging the arches a few millimetres this winter, so the proper ride height can be achieved once again
Also, i will use the oppurtunity to introduce a small teaser on my new car.
1990 Eunos Cosmo Type-E.CCS 20B, the full luxury package, and 20B engine
Its got a Tein coilover loweringkit, 18" rims of unknown brand, large frontmount Intercooler, aftermarket fuelpressure-regulator and a few other bits.
Only got this poor picture as of now, but more will come. Its the one in the back. The one in the front is identical, but another interiorpackage.
Interior pics(borrowed from www.3rotor.com):
Any feedback on stuff to change, redo or just anything at all is appreciated
Have a nice day all!
Thought i`d take the time to post a few pictures of my FD
1993 FD Touring, california import, resprayed 6 months ago in Spirit R titanium grey, 99spec. front, VIS C-F hood, 9 and 10x18 rims from RO_JA by rays wheels, on 245 and 275/45-18s, aftermarket drilled discs front and rear, greddy airfilters, 3" catback exhaust, HR lowering springs and yellow Koni shocks. No performance mods to talk about as of now, the engine is rebuildt with 8000 miles on the clock after rebuild.
I had to raise the car alittle cause the rims had juuuust the tad wrong offset, will fix this by massaging the arches a few millimetres this winter, so the proper ride height can be achieved once again
Also, i will use the oppurtunity to introduce a small teaser on my new car.
1990 Eunos Cosmo Type-E.CCS 20B, the full luxury package, and 20B engine
Its got a Tein coilover loweringkit, 18" rims of unknown brand, large frontmount Intercooler, aftermarket fuelpressure-regulator and a few other bits.
Only got this poor picture as of now, but more will come. Its the one in the back. The one in the front is identical, but another interiorpackage.
Interior pics(borrowed from www.3rotor.com):
Any feedback on stuff to change, redo or just anything at all is appreciated
Have a nice day all!
#6514
Full Member
Join Date: Jul 2006
Location: Vancouver Canada
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
#6517
Cheers David!!!
George
ps....i must get a Cosmo till what year where they in production??
#6521
Full Member
iTrader: (1)
Join Date: Nov 2003
Location: K-town
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for compliment!
Here is a link to a site that sells them:
http://www.racinglab.com/5zhy5zrwhsmb2.html
They are 5Zigen Hyper (2-piece) wheels.
Here is a link to a site that sells them:
http://www.racinglab.com/5zhy5zrwhsmb2.html
They are 5Zigen Hyper (2-piece) wheels.