Post Some Pics of your FD! :D <- Pics of your car go in this thread!!
#4484
It's Ole' Yeller!
iTrader: (10)
driftxsequence,
You can try just working and saving up for one too instead of having parents buy the car. The good thing is that while working for the money, you can just read/visit this forum when you have a chance and just learn what people are doing in regards to reliability, mods, and the like. At the end, not only would you get the FD, you'll also learn more of the car and appreciate it more because you worked very hard for it.
BTW, cool model.
You can try just working and saving up for one too instead of having parents buy the car. The good thing is that while working for the money, you can just read/visit this forum when you have a chance and just learn what people are doing in regards to reliability, mods, and the like. At the end, not only would you get the FD, you'll also learn more of the car and appreciate it more because you worked very hard for it.
BTW, cool model.
#4487
Rotisserie Engine
iTrader: (8)
thanks fdzero...the only problem is is that when i do have money i usually end up dumping it into my models =( i play on taking my nitro rc and putting a rear exhaust on it and have it come out like a real exhaust....blue smoke....with an rx7 body on it hahahaha blown seals xD and i come hear regardless daily to read up.
#4488
Senior Member
Join Date: Nov 2006
Location: West Palm Beach,FL
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
thanks fdzero...the only problem is is that when i do have money i usually end up dumping it into my models =( i play on taking my nitro rc and putting a rear exhaust on it and have it come out like a real exhaust....blue smoke....with an rx7 body on it hahahaha blown seals xD and i come hear regardless daily to read up.
#4491
I'm just getting started
Join Date: Jan 2005
Location: midwest
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Nice way to put it!
I have received numerous PMs regarding that specs of the car. Rather that replying to each message individually I will post it here. Sorry for the delay, it's my last week of college and I graduate in 3 weeks, finals can be rough.
The wheels are CCW Classics
18 x 10 all around (the exact backspacing was done by a friend of mine at school who I am waiting on for the exact measurements)
Tires are:
255/35/18 R
245/35/18 F
*I know that this is not the preferred sizing for this width of wheels but the car does not see any track use and is mainly garaged except for the occasional cruise.
Suspension:
Tein Flex
Camber, caster, and toe:
I had a friend who works at a local tire place do my alignment on his off time. The caster and toe are at factory spec. However, we played around with the camber F and R with enough room for the wheels to travel without rubbing on body panels or fender liners.
Thanks again for all the compliments!
Last edited by enkeirp02; 05-26-07 at 02:45 PM.
#4492
Banned. I got OWNED!!!
Join Date: Sep 2003
Location: new jersey
Posts: 2,030
Likes: 0
Received 0 Likes
on
0 Posts
i picked up 17/10's sometimes i wish i went with 18's but u cant put alot of tire and ride height is usually much higher ( higher stance), but then agian 18's come with more lip
Last edited by njstreetrx7; 05-26-07 at 03:13 PM. Reason: h
#4495
Lazyman
Join Date: Mar 2006
Location: Muscle Shoals, Alabama
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
#4496
catch my drift!
iTrader: (1)
Join Date: Apr 2007
Location: New Jersey!
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
heres a couple of my baby.. black on red!
http://img520.imageshack.us/img520/2897/dsc01795nr3.jpg
http://img520.imageshack.us/img520/2897/dsc01795nr3.jpg
http://img520.imageshack.us/img520/2897/dsc01795nr3.jpg
http://img520.imageshack.us/img520/2897/dsc01795nr3.jpg
http://img520.imageshack.us/img520/2897/dsc01795nr3.jpg
http://img520.imageshack.us/img520/2897/dsc01795nr3.jpg
#4498
bow leggin'
iTrader: (25)
OMG!! How did you import a spirit R?!? AND you converted it to LHD!! Man how much did all of that cost? I've been contemplating the doing the same thing, but I heard horn doesn't work when you do the conversion, so that kind of held me back.
Car looks good man, just messin around.
-Dan
#4499
Rob
iTrader: (2)
That's the one. That bumper came off a T66 semi bridge car that I was building. I got fed up with all of the half-*** work and work-arounds that my builder put into it so I parted it out and started from scratch w/ a new chassis. Needless to say I now do my own work to the extent possible.
#4500
catch my drift!
iTrader: (1)
Join Date: Apr 2007
Location: New Jersey!
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
OMG!! How did you import a spirit R?!? AND you converted it to LHD!! Man how much did all of that cost? I've been contemplating the doing the same thing, but I heard horn doesn't work when you do the conversion, so that kind of held me back.
Car looks good man, just messin around.
-Dan
Car looks good man, just messin around.
-Dan
why must people be such jokers? i hate this fucken website because of baby **** like this.. i feel like im back in high school.. i like the spirit r badge, is that a problem? i understand i should take off the efini badge but i just havent had the time.. if you dont like my car go **** yourself! i drive it not you. keep your opinions to yourself..