Bwek

iTrader: (4)

Hey guys an s5 car and motor (n/a) i will be throwing all the turbo2 stuff on the motor manifolds, turbo etc all the stock parts

the question i have is do i need to run an oil restricter on the feed for the turbo im going to pull the oil feed from the Oil pressure sensor (Just a Tee) I dont like the idea of a sandwich plate

and the sensor thread is it BPT? (british pipe thread) Or NPT (national pipe thread)

thanks guys

KhanArtisT

iTrader: (2)

No need for an oil restricter, and the thread pitch is probably metric.

Bwek

iTrader: (4)

I ask because I was big into honda's before and the oil sensor was BPT

lastphaseofthis

iTrader: (8)

it's metric. there's a thread around here some were.

jackhild59

iTrader: (7)

1/8" bpt

clokker

iTrader: (2)

It's BPT which has 28 threads per inch compared to standard pipe thread which has 27.
I've found them to be interchangeable.

Bwek

iTrader: (4)

I dont like interchanging them but thanks guys im sure if use lots of pipe dope or t tape it wont be a problem

Aaron Cake

iTrader: (1)

http://www.aaroncake.net/RX-7/naturbo13.htm