2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Wiring help pleae, 5 bare wires, no power to starter!

Thread Tools
 
Search this Thread
 
Old 10-07-11 | 11:51 PM
  #26  
satch's Avatar
Moderator
iTrader: (1)
 
Joined: Jun 2005
Posts: 11,738
Likes: 12
From: tulsa,ok.
Check the 15 amp Engine fuse to begin with. Black/White wire in the top row middle position should have power w/key to on at the Circuit Opening relay.

B/W wire top row far left has voltage w/key to start.

Blue wire has voltage w/key to start.

Blue wire has voltage w/key to on and fuel check connector jumpered or the solid Black wire bottom row far left position is jumpered to the Brown wire bottm row far right position in relay.
Old 10-08-11 | 12:33 AM
  #27  
BurritoBut's Avatar
Thread Starter
Full Member

 
Joined: Jan 2009
Posts: 152
Likes: 0
From: Auckland, New Zealand
^^Cheers for the info



Lol bloody rx7's...

Checked voltage at the relay, got 12v.
Checked voltage at the fuel pump, got 12v.
Turned key to on with the yellow plug jumped and it starts pumping!

Must have a dirty connector on the relay.

Only thing is that I have no fuel being pumped, should have a few litres but its pretty low. Will go get some more and check again.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 03:46 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 08:50 PM
befarrer
Microtech
3
08-22-15 06:52 PM




All times are GMT -5. The time now is 05:30 PM.