Why Is our TPS Adjustable?
#2
Brother of the Rotary
iTrader: (2)
Probably because our cars have so many funky things to control the idle, that adjusting one area affects the other.
I remember when we tried to lower the idle on Ian's AE using the throttle stop screw, it also increased the TPS resistance value from 1.0 to 1.3 kohms.
This in turn affected the drivability of his whole car. It was bucking like mad.
We had to fiddle with both for a while to get a 750 idle while still leaving enough travel for the TPS to properly fuel the car.
I think the TPS using only about 1/4 of its travel for the whole range 1v to 5v. That's really not a lot. So if something is even slightly out of whack, it causes problems. Giving it some adjustability is probably just a countermeasure.
I remember when we tried to lower the idle on Ian's AE using the throttle stop screw, it also increased the TPS resistance value from 1.0 to 1.3 kohms.
This in turn affected the drivability of his whole car. It was bucking like mad.
We had to fiddle with both for a while to get a 750 idle while still leaving enough travel for the TPS to properly fuel the car.
I think the TPS using only about 1/4 of its travel for the whole range 1v to 5v. That's really not a lot. So if something is even slightly out of whack, it causes problems. Giving it some adjustability is probably just a countermeasure.
Last edited by eViLRotor; 06-20-03 at 03:34 PM.
#4
Senior Member
Join Date: Dec 2001
Location: WEST
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by silverrotor
Sure, but you would have thought Mazda would have taken all the above to account.
Sure, but you would have thought Mazda would have taken all the above to account.
#5
Who owns the Chiefs?
Join Date: Apr 2001
Location: Dept 5, Ontario. Canada
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
Probably adjustable to make people pay service to have it recalibrated. The whole throttle body set up is a mess. I have no idea why they had to make it so complex. Then the S5's have the VDI to boot.
Freakin little spaceship like dashpot things hanging everywhere, hoses pokin' out. Bunch of springs, a double deck plenum. Fekin' absurd.
Freakin little spaceship like dashpot things hanging everywhere, hoses pokin' out. Bunch of springs, a double deck plenum. Fekin' absurd.
#7
Who owns the Chiefs?
Join Date: Apr 2001
Location: Dept 5, Ontario. Canada
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
If I were Mazda I'd hire a motorbike designer to take care of things like this. They constantly have to come up with clever packaging in limited space, they need to be innovative, and keep things as simple as possible at the same time.
Last edited by Mr. Eccentric; 06-20-03 at 05:40 PM.
Trending Topics
#9
Who owns the Chiefs?
Join Date: Apr 2001
Location: Dept 5, Ontario. Canada
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
Alright I looked up on this Occam's Razor thing, and one excerpt I found was:
one should not increase, beyond what is necessary
So, seeing as though our maximum set speed is 100kph in Ontario, I assume you'll be getting a limiter fitted to back off those mods on your car.
one should not increase, beyond what is necessary
So, seeing as though our maximum set speed is 100kph in Ontario, I assume you'll be getting a limiter fitted to back off those mods on your car.
#11
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
The fact that it adjustable has got nothing to do with Mazda. All TPS's on all cars are adjustable. They have to be, because they need to be set very precisely. That's not something that can be achieved with mass-production tolerances without some form of adjustability.
The problem with the early Mazda plunger-type TPS is you're relying on a sprung screw to set it's position, which doesn't seem to be able to stay in one place very long. Most other cars made since the mid-80's used a rotary-type TPS that slides over the throttle shaft and is fixed to the TB. To adjust is you loosen its mounting screws, turn the whole unit until it's correctly set and then (here's the important bit) bolt it down tight, usually with two 10mm bolts. Much more reliable.
The problem with the early Mazda plunger-type TPS is you're relying on a sprung screw to set it's position, which doesn't seem to be able to stay in one place very long. Most other cars made since the mid-80's used a rotary-type TPS that slides over the throttle shaft and is fixed to the TB. To adjust is you loosen its mounting screws, turn the whole unit until it's correctly set and then (here's the important bit) bolt it down tight, usually with two 10mm bolts. Much more reliable.
#12
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by Mr. Eccentric
The whole throttle body set up is a mess. I have no idea why they had to make it so complex.
The whole throttle body set up is a mess. I have no idea why they had to make it so complex.
Then the S5's have the VDI to boot.
#14
Who owns the Chiefs?
Join Date: Apr 2001
Location: Dept 5, Ontario. Canada
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by NZConvertible
That's because you don't understand what half of it's for... That VDI is the main reason S5's have 14hp more than S4's. You'd prefer to lose that? Besides, variable length induction systems are very common these days. Mazda was one of the pioneers of idea.
That's because you don't understand what half of it's for... That VDI is the main reason S5's have 14hp more than S4's. You'd prefer to lose that? Besides, variable length induction systems are very common these days. Mazda was one of the pioneers of idea.
So it looks like your jumping off on a rant like you know me is infact very lame, and very
#15
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by Mr. Eccentric
Thank for the self assesment you shrunken little kiwi.
Thank for the self assesment you shrunken little kiwi.
I was not saying that all those items don't have purposeful tasks, only that there must be a better way to extract the power out of the na without such a convoluted set up.
Also I am very much aware of what the VDI does, I have an S5.
So it looks like your jumping off on a rant like you know me is infact very lame, and very
Also, I'm not sure what sexual orientation has to do with this discussion, but whatever...
#17
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
I didn't read the whole thread, so I am sorry if this has been answered.
The main reason the TPS is adjustable is because things wear. The throttle shaft, throttle lever, TPS itself, etc. All of them will wear down over time, changing the value of the TPS. Since the TPS is simply a slide pot, as the wiper rubs the carbon track it will also wear itself. So Mazda has made it (easily) adjustable to compensate for all these things.
The main reason the TPS is adjustable is because things wear. The throttle shaft, throttle lever, TPS itself, etc. All of them will wear down over time, changing the value of the TPS. Since the TPS is simply a slide pot, as the wiper rubs the carbon track it will also wear itself. So Mazda has made it (easily) adjustable to compensate for all these things.
#19
Who owns the Chiefs?
Join Date: Apr 2001
Location: Dept 5, Ontario. Canada
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by NZConvertible
That doesn't mean you fully understand it, otherwise you wouldn't have said "there must be a better way". As I said, variable length intakes are now very common. If there's a better way, why is it still being used? I get annoyed when people who admit they don't know what they're talking about refer to something as "absurd", when it was in fact necessary.
That doesn't mean you fully understand it, otherwise you wouldn't have said "there must be a better way". As I said, variable length intakes are now very common. If there's a better way, why is it still being used? I get annoyed when people who admit they don't know what they're talking about refer to something as "absurd", when it was in fact necessary.
What is absurd is that Mazda kept the same basic design for the engine since the inception. Finally with the Renesis they've made a design leap that really paid off. The variable length intake is to increase power across the whole rev band (like the 787b's), and the new types are dynamic in nature, unlike like Mazda's so they don't have much in common.
The Mazda system is aux porting, and it was overly complex and fragile. How many people have stuck 5th and 6th ports? Not that the ports aren't needed, but that they are prone to failure due to the method of actuation. How many people have to shell out massive money to replace the TPS's on S5's? How many people question the reliability of their thermopellet? It's foolishly complex, and the Renesis has proved that. The technology that's on the Renesis was very much available at the time.
All of those bits were necessary to make the 13b of the time run, yes. However, I am not questioning that; I am questioning why they designed it to require such an elabourate throttle/intake set up in the first place.
Last edited by Mr. Eccentric; 06-22-03 at 01:31 PM.
#20
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by Mr. Eccentric
All one needs to know about the VDI is that it opens at around 5000rpm. Simple.
All one needs to know about the VDI is that it opens at around 5000rpm. Simple.
The variable length intake is to increase power across the whole rev band (like the 787b's), and the new types are dynamic in nature, unlike like Mazda's so they don't have much in common.
The Mazda system is aux porting, and it was overly complex and fragile. How many people have stuck 5th and 6th ports? Not that the ports aren't needed, but that they are prone to failure due to the method of actuation.
How many people have to shell out massive money to replace the TPS's on S5's?
All of those bits were necessary to make the 13b of the time run, yes. However, I am not questioning that; I am questioning why they designed it to require such an elabourate throttle/intake set up in the first place.
#21
Well said NZConvertible.
5th and 6th aux ports were V-TEC when V-TEC was still being worked on. Mazda is the only manufacturer working on roary engine in the world, while the rest of the world R+D goes into piston engines. They have been pretty creative and effective with what they've done.
5th and 6th aux ports were V-TEC when V-TEC was still being worked on. Mazda is the only manufacturer working on roary engine in the world, while the rest of the world R+D goes into piston engines. They have been pretty creative and effective with what they've done.
#22
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 31,145
Received 2,799 Likes
on
1,981 Posts
Originally posted by Mr. Eccentric
What is absurd is that Mazda kept the same basic design for the engine since the inception. Finally with the Renesis they've made a design leap that really paid off. The variable length intake is to increase power across the whole rev band (like the 787b's), and the new types are dynamic in nature, unlike like Mazda's so they don't have much in common.
What is absurd is that Mazda kept the same basic design for the engine since the inception. Finally with the Renesis they've made a design leap that really paid off. The variable length intake is to increase power across the whole rev band (like the 787b's), and the new types are dynamic in nature, unlike like Mazda's so they don't have much in common.
mike
#24
Senior Member
Join Date: Feb 2003
Location: DALLAS TX
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
meh i just learned to live with the 0 idle and brake with the left foot.
i agree with j9fd3s when he says the major improvments are in the exhaust ports, but lots of the basics have been fidled with in the renesis as well (lighter rotors, better seals -all of em-, and the intake tract is similar to the s5, but the ports are bigger and come on in a **** load of stages comparativly. as for the technology being available to mazda in the 80s and earily 90s to do this, they tried.
the new exhaust ports on the side arent exactly "new" mid 80s mazda tried to do this exact thing, but the oil injection used to lube up our rotaries (remember, since then, we have made leaps and bounds on synthetic oils and such) always clogged the side ports forcing the team to dump the idea for the more clog-free exhaust ports you see now.
gosh i feel like im quoting from some article that i read like 3 months ago.....
i agree with j9fd3s when he says the major improvments are in the exhaust ports, but lots of the basics have been fidled with in the renesis as well (lighter rotors, better seals -all of em-, and the intake tract is similar to the s5, but the ports are bigger and come on in a **** load of stages comparativly. as for the technology being available to mazda in the 80s and earily 90s to do this, they tried.
the new exhaust ports on the side arent exactly "new" mid 80s mazda tried to do this exact thing, but the oil injection used to lube up our rotaries (remember, since then, we have made leaps and bounds on synthetic oils and such) always clogged the side ports forcing the team to dump the idea for the more clog-free exhaust ports you see now.
gosh i feel like im quoting from some article that i read like 3 months ago.....
#25
Senior Member
Join Date: Mar 2002
Location: Treasure Island, FL
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
My 2 cents is Mazda designed an innovative sports car.
They did not consider shade tree mechanics that don't want to spend a buck to have some one who knows what they are talking about fix something. And then they bitch about it.
Cars and women, (and dumb asses) you can't fix either one...although a little adjustment may help.
Keep rippin the **** out of your 7, someday mine will be worth a lot...
__________________
They did not consider shade tree mechanics that don't want to spend a buck to have some one who knows what they are talking about fix something. And then they bitch about it.
Cars and women, (and dumb asses) you can't fix either one...although a little adjustment may help.
Keep rippin the **** out of your 7, someday mine will be worth a lot...
__________________
Last edited by downwinddave; 06-23-03 at 12:10 AM.