who runs 1/4 mile???
06-17-03, 12:39 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: South Jersey
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
who runs 1/4 mile???
i dont know if this is the right forum but...
i was just wondering what times you guys are turning out. you are called FCs right?
if you could leave your ET, 60 foot, and mods you have that would be great!
thanks.
i was just wondering what times you guys are turning out. you are called FCs right?
if you could leave your ET, 60 foot, and mods you have that would be great!
thanks.
06-17-03, 02:33 AM
#2
EIT
Join Date: Jan 2002
Location: Austin, TX
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
13.8@104
2.4 60' time
this was on a broken differntial mount, and busted rear shocks.
2.5'' TID/filter
3'' downpipe/midpipe
n1 catback
mbc set to 10 pounds
walbro fuel pump 255lph
fcd
2.4 60' time
this was on a broken differntial mount, and busted rear shocks.
2.5'' TID/filter
3'' downpipe/midpipe
n1 catback
mbc set to 10 pounds
walbro fuel pump 255lph
fcd
06-17-03, 12:17 PM
#6
Senior Member
Join Date: Mar 2001
Location: Centralia, WA, USA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
went to the track again.
Finally got another day @ the track.
13.1@108.
still have the stock topmount....but I installed the new tranny. I was only running 9 psi. Can't wait until 18psi.
__________________________
89 TII
Streetport
Garrett t04 hybrid
microtech standalone
the list is forever.
13.1@108.
still have the stock topmount....but I installed the new tranny. I was only running 9 psi. Can't wait until 18psi.
__________________________
89 TII
Streetport
Garrett t04 hybrid
microtech standalone
the list is forever.
Trending Topics
06-20-03, 05:30 PM
#13
Senior Member
best run.
R/T 1.121
60ft. 2.166
330ft. 6.041
1/8th 9.305
MPH 76.18
"1000" 12.12
1/4th 14.535
MPH 93.47
turbo boost stuck @ 7psi, exhaust, gut cats, full interrior, tb mod, no intake, fuel pump, microtech ecu, tool boxes, misc **** (water bottles,spare tire)..tire pressure @ 21psi(bald),blah blah blah
R/T 1.121
60ft. 2.166
330ft. 6.041
1/8th 9.305
MPH 76.18
"1000" 12.12
1/4th 14.535
MPH 93.47
turbo boost stuck @ 7psi, exhaust, gut cats, full interrior, tb mod, no intake, fuel pump, microtech ecu, tool boxes, misc **** (water bottles,spare tire)..tire pressure @ 21psi(bald),blah blah blah
Last edited by 600HP CLUB; 06-20-03 at 05:36 PM.
06-20-03, 07:06 PM
#15
stop stealing my avatar
Join Date: Apr 2002
Location: Canton MI
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
I ran my old NA, 16.02 with a 6.4 60-ft.
most na's are in the 15 second range, it's rare to get one into the 14's, w/o majior weight reduction/nos and so on.
basic mods (intake and exhust) will put a t2 into the low 14-high 13 second range. Add a hybrid turbo, EMS, and fuel system and run deep into the 12's. full aftermaket turbo, FMIC, should get you into the 11's.
I didn't add all the PROPER TUNING, and little things, guages, wheels/tires, suspension, bla, bla, bla you need to make these times possible, just giving a rough outline.
I am taking my t2 to the strip tomarrow, I'll keep ya posted
most na's are in the 15 second range, it's rare to get one into the 14's, w/o majior weight reduction/nos and so on.
basic mods (intake and exhust) will put a t2 into the low 14-high 13 second range. Add a hybrid turbo, EMS, and fuel system and run deep into the 12's. full aftermaket turbo, FMIC, should get you into the 11's.
I didn't add all the PROPER TUNING, and little things, guages, wheels/tires, suspension, bla, bla, bla you need to make these times possible, just giving a rough outline.
I am taking my t2 to the strip tomarrow, I'll keep ya posted
06-20-03, 11:18 PM
#16
Rotary Enthusiast
Join Date: Oct 2002
Location: The Boro, TN
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
I ran 13.6 on stock turbo, and stock ic on stock ecu. Just had a full exhaust and intake plus avcr.
I just cant wait to see the new setup run when finished, i should be in the 10's if not lower.
Going Half bridge Re motor, T66dbb, haltech ek6, Greddy 3row fmic, Twin walbros, Act 6puck, and some other stuff, i dont really know what else.
-Chris
I just cant wait to see the new setup run when finished, i should be in the 10's if not lower.
Going Half bridge Re motor, T66dbb, haltech ek6, Greddy 3row fmic, Twin walbros, Act 6puck, and some other stuff, i dont really know what else.
-Chris
06-21-03, 11:00 AM
#21
88 AE
Join Date: Mar 2002
Location: N/A
Posts: 2,865
Likes: 0
Received 0 Likes
on
0 Posts
most na's are in the 15 second range, it's rare to get one into the 14's, w/o majior weight reduction/nos and so on.
14s dont seem to be the problem with n/as, just the 13s.
06-21-03, 11:48 PM
#22
stop stealing my avatar
Join Date: Apr 2002
Location: Canton MI
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
yeah, that's why I said it's rare, not hard
so I ran my t2 with mods listed below and got
60ft-2.181
594ft-8.651
1/8 et-9.184
1/8 mph-84.38
1/4 et-13.851
1/4 mph-102.55
this was my first and only pass, my car was HOT from my 2 hour drive to the track. I was runnign 10psi
so I ran my t2 with mods listed below and got
60ft-2.181
594ft-8.651
1/8 et-9.184
1/8 mph-84.38
1/4 et-13.851
1/4 mph-102.55
this was my first and only pass, my car was HOT from my 2 hour drive to the track. I was runnign 10psi
06-23-03, 03:09 AM
#23
Back from teh deadly!
Join Date: Feb 2001
Location: Louisville KY 40299
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
I ran an 8.6 @85 in the 1/8 mile with RB turboback, FCD, Fuel pump, and an AFC.
A few things have changed on the car but nothing that would really make it go faster.
A few things have changed on the car but nothing that would really make it go faster.
