The only company that makes them that I know of is RE Amemiya, but it is about $1100 +shipping. I will need a GT wing for I will be tracking my car this coming season. Does anyone know any other companies or have any suggestions?

 

What are you going to do to balance the massive imbalance between front and rear downforce that wing will cause?

 

or how are you going to stear that thing when it takes flight

 

This is the wing I plan to put on my car someday sooner or later... when I decide to do the exterior... It can be found at www.streetconcept.com... just do a search for the fc for all available and you will find it.. It's most likely universal as the display pictures are of other cars... could just be on a vert tho, but I like because it's not a park bench

 

The wing should be at least as high off the rear as the chord length (that's the length from the front of the wing to the rear) for maximum effectiveness.

AutoRnD sells some brackets to fit FC's.

 

Im trying to find one myself. The ATP(?) gt300/500 can be found on ebay but they are like 1000usd + shipping and thats alittle to much for me :S

 

GarageBB
http://www.garagebb.jp/
http://www.garagebb.jp/gtwing/forte_fc3s.htm





You can choose the total length blade tip board from description below concerning size

* Total length (length of main wing): 1500 mm or 1600 mm or 1700 mm or 1800 mm
* Height (length of foot): FC3S exclusive use (3 gradual adjustment)
* Blade tip form of board:

A type
http://www.garagebb.jp/gtwing/gazo_f...-444x333_a.jpg

B type
http://www.garagebb.jp/gtwing/gazo_f...-444x333_b.jpg

C type
http://www.garagebb.jp/gtwing/gazo_f...-444x333_c.jpg

* Length of front and back of main wing: Maximum (per center) at width approximately 28 cm
* Weight (@ 1600 mm): FRP make approximately 5Kg, carbon & Kevler make approximately 4Kg



In addition feature

* Adjustment function of angle is upper part 3 step adjustments.
* 3 steps (approximately 3 centimeters to cut height) it becomes adjustment.
* The volts/bolts which have been used are the stainless steel which entirely is strong in the rust (SUS304).
* As for the finish of the surface as for FRP make they are all clean black gel coats.
* The carbon (the twill) & carbon Kevler (the twill) makethe surface is the beautiful clearing gel coat finish.
* The special high intensity FRP material (enterprise secret) using, it increases the foot of FRP make of the wing.
* As for method of installation, removing the genuine wing, making use of that hole one side 2 these volts/bolts & the nut
* (4 total) you just stop with the plus both sides tape and the like. Simplicity installation!
* While the wing is attached it can open and close the rear hatch.
* Genuine radio you can use also the antenna that way.



Price

*FRP make (black gel coat): 73500 Yen (including tax)
* Carbon make (as for foot FRP make): 94500 Yen (including tax)
* Carbon Kevler make (as for foot FRP make): 94500 Yen (including tax)
* Full carbon make (foot carbon make): 13500 Yen (including tax)
* Full carbon Kevler make (foot carbon Kevler make): 136500 Yen (including tax)




...

i have no Life

 

FEED has one.

 

Wow, more than I expected. Thanks guys.

 

I think I am going with the bracket from AutoRnD. Chokets makes the brackets. Then I can get either a voltex or APR universal wing. That sounds like a plan.