Who has 400-500 hp to the wheels?
#5
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Oct 2001
Location: dallas,texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
I expect to atleast hit 350hp....but have heard people doing 400-450 with the same setup as me.
Read my sig's for my mod's....but then again you will probally see my car next weekend after I get the tuning finished by Don Marvel
Read my sig's for my mod's....but then again you will probally see my car next weekend after I get the tuning finished by Don Marvel
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Trending Topics
#9
Soul Assassin didn't have 400-500 rwhp.
He had over 600 rwhp!!!!
If you are looking for some cars with over 400 rwhp, then it's just a simple scroll down to the Single Turbo and Rotary Performane forums. There you will find many.
He had over 600 rwhp!!!!
If you are looking for some cars with over 400 rwhp, then it's just a simple scroll down to the Single Turbo and Rotary Performane forums. There you will find many.
#11
ummmmm
I did 372 @ 12 psi on the stock ports and only bolt ons ( no internal mods)
after getting ported and some more haltech tuning
I did 330 @ 8 psi
that night went out and was working on tuning the AVCR. had it set for 1 bar. ended up getting 1.5 bar.
ran lean and went pop!!!
by calc running at 23psi the car made over 500 to rear wheels on pump gas then when POP.
engine is rebuit again now and im changing boost controllers from AVCR to Profec B spec.
when I got the dyno again I will post and update.
I did 372 @ 12 psi on the stock ports and only bolt ons ( no internal mods)
after getting ported and some more haltech tuning
I did 330 @ 8 psi
that night went out and was working on tuning the AVCR. had it set for 1 bar. ended up getting 1.5 bar.
ran lean and went pop!!!
by calc running at 23psi the car made over 500 to rear wheels on pump gas then when POP.
engine is rebuit again now and im changing boost controllers from AVCR to Profec B spec.
when I got the dyno again I will post and update.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM