Where the hell is the ECU?!
#1
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Nov 2001
Location: chillicothe, OH
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
![Thumbs down](https://www.rx7club.com/images/icons/icon13.gif)
i know it's by the passengers feet somewhere, but i don't know which box is the right on. the one i'm looking at says "conbox passive belt" i'm hooking up an A/F gauge so i need to find the O2 wire, thanks
#4
REINCARNATED
![](/images/misc/20_year_icon.png)
iTrader: (4)
you need to pull the carpet up on the passenger footwell area..
it's located under a large metal footplate... after you remove 4 bolts pull the footplate out and the ECU is located underneither that, you can't mistake it, it's got a couple rather LARGE plugs going into/out of it
-Markus
"good luck"
it's located under a large metal footplate... after you remove 4 bolts pull the footplate out and the ECU is located underneither that, you can't mistake it, it's got a couple rather LARGE plugs going into/out of it
-Markus
"good luck"
#5
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Nov 2001
Location: chillicothe, OH
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys! what is the box i was messing with then? is it for the seat belts? if so i'm thinking i could take that thing out since i have harnessbelts
#6
Displacement > Boost
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Oct 2002
Location: Mississippi
Posts: 3,503
Likes: 0
Received 0 Likes
on
0 Posts
Slightly off topic, but here is where I put my ECU. I threw away that metal plate when I was going through my weight reduction orgy last winter.
My header will be double heat wrapped, then have an aluminum heat shield around it creating a shroud which will be cooled with incoming air fed through a flex pipe from the drivers side bumper vent. I am hoping that all this will create underhood temps that are
compared to stock.
![](http://home.att.net/~jeff.g.quinn/ECUfirewall.jpg)
My header will be double heat wrapped, then have an aluminum heat shield around it creating a shroud which will be cooled with incoming air fed through a flex pipe from the drivers side bumper vent. I am hoping that all this will create underhood temps that are
![Cool](https://www.rx7club.com/images/smilies/cool.gif)
#7
Rotary Enthusiast
![](/images/misc/20_year_icon.png)
You can find my ecu in the trash, it just depends what car and temper you have LOL
Yours should be under the metal plate on the passengers side, the box to the right with a number N3XX on it.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)