where to get this bushing....?
#1
where to get this bushing....?
the bolt that goes through this bushing was so rusted and corroded, u might as well fu**ing say it was welded together, that the only way to get it off was to turn really hard till the bushing ripped apart on the inside. so thats done, i go to the local mazda dealership, order a part even though we were both not sure if it was right, call them couple days later to find out it was wrong so they looked into it (cool guys there), and the only way i can get the bushing new is to buy the whole hub, hell no. so does anyone know where else to get this stupid bushing, i just want the plain old stocker. (the outside of the bushing is still on there in the pic, but i already pressed it out. and if u cant tell by the pic, this is the left rear hub. its the bushing on the front that goes verticle)
#2
THINK
Join Date: Jan 2003
Location: Mississauga, Ontario, Canada
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
hey
you have two choices to get the orginal bushing from a mazda dealership or wherever you prefer to get your oem mazda parts, (victoria british...etc). Or you can pick up a set of Rear Suspension Upright Toe Eliminator that fit there from racing beat that will be 1/4 of the price of the original stuff from mazda. neway i hope i helped you out a bit ttyl peace
#3
i hadnt seen them in victoria british. id rather like to get just stock for now but if i cant, yes, i was going to go with racing beat or other like so brands. i just want stock though because i just got done redoing the other side completely and just hate the idea of taking everything apart again just to put a new damn bushing in. to match the bad side. anyways...any more info people?
#5
I R SAD PANDA W/O BAW
Get the racing beat toe eliminators. I had these installed on my car and they feel awesome. I was told the corksport ones are not as snug. You will need to press them in and out. I had someone install them for me but there is a write up on teamfc3s about it. You dont want to pull the hubs and have them pressed it and out again if you install the stock ones and then later decide to get the RB toe eliminators. Get the RB ones and be done with it. I think you'll like it.
#6
FC Revolution
Join Date: Feb 2004
Location: watsonville, california
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
YOu could go to mazdatrix.com they might have the stock one....
Or you could just take the extra effort ant replace bouth with the toe eliminators..
Gil
Or you could just take the extra effort ant replace bouth with the toe eliminators..
Gil
Trending Topics
#8
I R SAD PANDA W/O BAW
Originally Posted by limbar85
thanks for the info ilike2eatricers. just wondering though...do u even notice that much of a difference. you still have to convince me some cause it does keep the *** end from spinning out some stock. im interested.....just give me some more info. thanks
I suppose it depends how worn the OEM bushings are. I felt a big difference probably because my bushings were crap and not working the way they should have from the factory.
Thread
Thread Starter
Forum
Replies
Last Post
ra ra rotory
2nd Generation Specific (1986-1992)
8
12-13-02 07:45 PM