wheel hop
#26
i am legendary
Originally posted by Scalliwag
You either need a engine torque brace or solid motor mounts. Hell you may even have a broke motor mount :shock: But it sounds like your motor is twisting hard.
You either need a engine torque brace or solid motor mounts. Hell you may even have a broke motor mount :shock: But it sounds like your motor is twisting hard.
Yah I've been thinking about the engine torque brace for a while, when I pull my motor to port it I'm going to inspect the motor mounts, probably replace them with some better solid ones.
#27
WingmaN
Join Date: Aug 2002
Location: Fort Worth Texas
Posts: 4,324
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dDuB
Yah I've been thinking about the engine torque brace for a while, when I pull my motor to port it I'm going to inspect the motor mounts, probably replace them with some better solid ones.
Yah I've been thinking about the engine torque brace for a while, when I pull my motor to port it I'm going to inspect the motor mounts, probably replace them with some better solid ones.
Keep in mind when you are lauching it is much worse than what you will see doing this test.
You could pull the 4 bolts and yank the hood and take it to an empty parking lot and do one of your 6k launches if you really wanna see what happens
#28
i am legendary
Originally posted by Scalliwag
Those are pretty easy to check and change out without pulling the motor. One pretty easy way to tell is with your hood open and the e-brake locked load up the motor in gear a bit while looking at the top of your motor (look between the cowl and the hood ) and see how much the motor rocks over.
Keep in mind when you are lauching it is much worse than what you will see doing this test.
You could pull the 4 bolts and yank the hood and take it to an empty parking lot and do one of your 6k launches if you really wanna see what happens
Those are pretty easy to check and change out without pulling the motor. One pretty easy way to tell is with your hood open and the e-brake locked load up the motor in gear a bit while looking at the top of your motor (look between the cowl and the hood ) and see how much the motor rocks over.
Keep in mind when you are lauching it is much worse than what you will see doing this test.
You could pull the 4 bolts and yank the hood and take it to an empty parking lot and do one of your 6k launches if you really wanna see what happens
Yah I know you can check them without pulling the motor, but I was just going to inspect and probably replace them when I do my porting.
I don't think I want to see what happens when I do a 6k launch I'm probably not being very nice to my motor on those.
#30
i am legendary
Originally posted by Scalliwag
Haha! The old "what I don't know won't hurt me" approach! Well I just finished up 6 sets of diff mounts and one has your name on it You will see it Wednesday.
Haha! The old "what I don't know won't hurt me" approach! Well I just finished up 6 sets of diff mounts and one has your name on it You will see it Wednesday.
Sweet deal
#31
WingmaN
Join Date: Aug 2002
Location: Fort Worth Texas
Posts: 4,324
Likes: 0
Received 0 Likes
on
0 Posts
The Atkins (Atkins Rotary) got a diff mount last month and they said it fixed their wheel hop. This was on a supercharged 2nd gen. Here is the link to Kathy Atkins post on it http://www.vintagerotaries.com/FORUM...scalliwag#5294
#32
Senior Member
Thread Starter
Join Date: Oct 2003
Location: idaho
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
well i just ordered wheels and tires, the rears are 17x9 with 265-40's, i don't know about good struts and springs cuz that might lower it onto the wheels, but i'm definetly going to get solid motor mounts and solid diff. mounts and maybe even get a suspension bushing kit
#33
this spring I checked my motor mounts and both were completely sepearated. I replaced them both with chunks of 2x4 and it's fantastic. no (additional) vibration, clutch feels better, etc.
My rear suspension is starting to squeak when launching the car (just normally).. I think my diff mount is #$()*d. I'll have a look at it this week.
My rear suspension is starting to squeak when launching the car (just normally).. I think my diff mount is #$()*d. I'll have a look at it this week.
#34
Rotary Enthusiast
Join Date: Sep 2002
Location: Statesboro, GA
Posts: 1,233
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by J-Rat
Man, I get 1.8 60 ft times on street tires!
Man, I get 1.8 60 ft times on street tires!
Thread
Thread Starter
Forum
Replies
Last Post
ray green
1st Gen General Discussion
2
09-02-15 06:35 AM