What's next guys?
06-20-02, 04:11 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: San Francisco, CA
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
What's next guys?
what's up... just got a "88 N/A FC last week
I installed a cone filter and today I went down to the muffler shop and had them put 2.5" piping all the way from the header back to a sinle turbo muffler...
What should be the next few mods I do (I have a pretty limited budget for this car...)
Should I remove the air pump?
one more question, they air tube isn't connected to the piping, so does this mean that the 6-port actuators aren't working right now?
ur help is much appreciated...
I installed a cone filter and today I went down to the muffler shop and had them put 2.5" piping all the way from the header back to a sinle turbo muffler...
What should be the next few mods I do (I have a pretty limited budget for this car...)
Should I remove the air pump?
one more question, they air tube isn't connected to the piping, so does this mean that the 6-port actuators aren't working right now?
ur help is much appreciated...
06-20-02, 04:59 AM
#2
What Subscription?
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Sooo... Whats the mechanical condition of the engine?
Compression Test results?Start with the basics. A compression test and a pressurized coolant system test. If the results of these are good a full tune-up and an injector cleaning are in order. Get your 6 pors working and install pineapple sleeves if you want. AND THEN start your mods.
Compression Test results?Start with the basics. A compression test and a pressurized coolant system test. If the results of these are good a full tune-up and an injector cleaning are in order. Get your 6 pors working and install pineapple sleeves if you want. AND THEN start your mods.
06-20-02, 05:02 AM
#3
Junior Member
Thread Starter
Join Date: Apr 2002
Location: San Francisco, CA
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
the motor has 97k miles and seems to be running strong, haven't had a chance for a compression test just yet... what kind of #'s should I expect?
How do I do that coolant test?
How do I do that coolant test?
Thread
Thread Starter
Forum
Replies
Last Post
Kruel13
1st Generation Specific (1979-1985)
24
09-16-15 09:08 AM