whats needed to drop a 20B?
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: Mill City
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
whats needed to drop a 20B?
Would any of u guys happen to know exactly what i would need in order to drop a 20B engine into my 86 RX-7, cause corksport is selling the engine for like $5,000 but i asked them what i need in order too put it in and they didn't tell me. So if anybody could help me thanx!
#2
Just Call Me Terminator!
iTrader: (4)
Join Date: Feb 2001
Location: NJ
Posts: 7,848
Likes: 0
Received 0 Likes
on
0 Posts
if you have to ask then its not for you J/K you need a ton of custom parts to make it work...... www.k2rd.com mounts. alot of 20B conversions go into the $20k range..... you are much better off sticking with a 13B or just get a turbo II if you don't already have one. the conversion to 20B is a long expensive road and its def not for everyone. you need two things deep pockets and alot of patience
#3
Driven a turbo FB lately?
iTrader: (1)
Figure on about 10-12k$ after the cost of the motor, if you do all the work yourself...
Read around in the 20b forum... Theres a lot of stuff you need to make it work...
By the way, I had a link somewhere where they would ship you a whole front clip for like $3500
Read around in the 20b forum... Theres a lot of stuff you need to make it work...
By the way, I had a link somewhere where they would ship you a whole front clip for like $3500
#5
Lives on the Forum
http://fc3s-pro.com/TECH/20B/20b.html
$10k in parts minimum - more like $15k in parts.
That does NOT count labor!
-Ted
$10k in parts minimum - more like $15k in parts.
That does NOT count labor!
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
stickmantijuana
20B Forum
8
08-18-15 02:46 PM