What would it take to make a TII AWD?
#1
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: RX7 Heaven
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
What would it take to make a TII AWD?
I know, no flaming please, but I was wondering if this would be possible... This is just a crazy idea I was thinking for a kit car and I was wondering the feasibility of this plan. (BTW, i was thinking about this before that 4WD scout with a rx-7 body came out)... Anyway, the parts required are the differentials and transfer case. We already have a rear LSD which is stock on the T2s, so all I would need would be a front differential (do fc's have these or do just AWDs have them?) and a transfer case. The obvious choice would be to go to a junkyard and find a junkyard Subaru which I could use... if I did this, I would try to get the front diff and transfer case to bolt right up with the rear drive shaft... if I could do this, then it would be possible to rig up an AWD system on a FC... comments?
#5
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
but I was wondering if this would be possible
no
#7
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: RX7 Heaven
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Scott 89t2
for a normal person who doesn't have unlimted access to machine shops and custom fab stuff. and unlimted money $50k+?
no
for a normal person who doesn't have unlimted access to machine shops and custom fab stuff. and unlimted money $50k+?
no
Trending Topics
#10
Rotary Enthusiast
Join Date: Apr 2003
Location: NW Arkansas
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Louis M
haha, i was just rambling... i thought of an idea and I said I better quickly write it down... so the general consensus is it isn't possible... but is this possible: bolting an rx-7 tranny to a subaru transfer case and everything from suspension to engine would be rx-7 except the differentials, and driveshafts...
haha, i was just rambling... i thought of an idea and I said I better quickly write it down... so the general consensus is it isn't possible... but is this possible: bolting an rx-7 tranny to a subaru transfer case and everything from suspension to engine would be rx-7 except the differentials, and driveshafts...
subarus don't have transfer cases, but Mazda Type R transmissions do. they are for 4WD however, but this is the piece that millen used.
#12
If you want to keep it in the family, the 323 GTX was AWD, but they are rare and expensive.
There are plenty of cars out there besides Subarus that have AWD systems. If you were serious about this youd have to do some research into which would work best.
BMW 325ix
VW Passat Syncro
Quattro systems from almost any Audi
To be honest I'd stay away from Subaru as thir AWD system is 90% FWD, and AWD when needed - whereas the BMW is RWD all the time, and AWD when needed.
There are plenty of cars out there besides Subarus that have AWD systems. If you were serious about this youd have to do some research into which would work best.
BMW 325ix
VW Passat Syncro
Quattro systems from almost any Audi
To be honest I'd stay away from Subaru as thir AWD system is 90% FWD, and AWD when needed - whereas the BMW is RWD all the time, and AWD when needed.
#13
Senior Member
Join Date: Oct 2001
Location: Somerville MA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
in the Subarus, the front diff is one piece with the transmission. I know, because I had one
The front axles come out of the tranny...which means the engine has to be completely in front of the front wheels, which means it's not going to happen in an RX7.
Good luck, though. But it would be difficult with a longitudinally mounted engine which is directly over, and just behind, the front axles.
The front axles come out of the tranny...which means the engine has to be completely in front of the front wheels, which means it's not going to happen in an RX7.
Good luck, though. But it would be difficult with a longitudinally mounted engine which is directly over, and just behind, the front axles.
#14
Rotary Enthusiast
Join Date: Apr 2003
Location: NW Arkansas
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ZachSpazz
Umm, the Mazda Type-R transmission is the transmission that is used in the Turbo IIs. I think you're thinking of something else.
Umm, the Mazda Type-R transmission is the transmission that is used in the Turbo IIs. I think you're thinking of something else.
Hey Jgard what's up? when did you sell the scoob? you still hang out in OT?
#15
Senior Member
Join Date: Oct 2001
Location: Somerville MA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
yeah, are you over there, also? I'm JGard over there...and yes, I waste many hours in OT hehe
I sold my RS (it was a 2000) about a year ago. Miss that car...but I've always liked the FC's more
I sold my RS (it was a 2000) about a year ago. Miss that car...but I've always liked the FC's more
#18
I wish I had a posse...
Join Date: Feb 2001
Location: Cincinnati, Ohio-Boycott Central
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by projekt
it's also the trannny that's in the B2600i and MPV 4WDs, so no, i'm not thinking of something else, but thanks for trying.
it's also the trannny that's in the B2600i and MPV 4WDs, so no, i'm not thinking of something else, but thanks for trying.
Gearbox R TYPE
It feels so good to be right.
#19
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: RX7 Heaven
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
so what do you all think about taking a 323 transfer case, differntials, and even the axles, brakes and attaching them to a FC engine and tranny... but about the axles and brakes, couldn't i still use the fc ones?
#20
Rotary Enthusiast
Join Date: Apr 2003
Location: NW Arkansas
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ZachSpazz
You're STILL wrong. And I quote from the 2nd-Gen Mazda RX-7 book written by Jack Yamaguchi.
It's on page 82 if you have the book close by.
It feels so good to be right.
You're STILL wrong. And I quote from the 2nd-Gen Mazda RX-7 book written by Jack Yamaguchi.
It's on page 82 if you have the book close by.
It feels so good to be right.
the GTX is not a good idea unless you have 2x the price of the car for spare trannies.
Jgard, i'm Projekt (surprise) on nasioc.
#21
Rotary Enthusiast
Join Date: Apr 2003
Location: NW Arkansas
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Louis M
so what do you all think about taking a 323 transfer case, differntials, and even the axles, brakes and attaching them to a FC engine and tranny... but about the axles and brakes, couldn't i still use the fc ones?
so what do you all think about taking a 323 transfer case, differntials, and even the axles, brakes and attaching them to a FC engine and tranny... but about the axles and brakes, couldn't i still use the fc ones?
the tranny is also made of glass.
#22
3rd gen junkie
Join Date: May 2002
Location: san diego
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
hmm. I don't think it would be worth the effort.. and if you are here asking how to do it, I'm guessing you don't have the necessary skills to complete the project. No offense meant, I just mean that it would probably be better to buy an AWD car and be done with it. You could swap a rotary into an AWD car though. That'd be easier than what you're thinking about doing.
#23
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: RX7 Heaven
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by FCdemon
hmm. I don't think it would be worth the effort.. and if you are here asking how to do it, I'm guessing you don't have the necessary skills to complete the project. No offense meant, I just mean that it would probably be better to buy an AWD car and be done with it. You could swap a rotary into an AWD car though. That'd be easier than what you're thinking about doing.
hmm. I don't think it would be worth the effort.. and if you are here asking how to do it, I'm guessing you don't have the necessary skills to complete the project. No offense meant, I just mean that it would probably be better to buy an AWD car and be done with it. You could swap a rotary into an AWD car though. That'd be easier than what you're thinking about doing.
1) remember that although i said that this was hypothetical... i was considering it if it could be done cheap... now since it has been pretty much decided that it cannot be done, its more for purposes of discussion...
2)would a rx-7 t2 engine and tranny bolt onto a 323gtx? which would then have the rotary power and also be AWD...
thanks guys, i love discussions like this
#24
To be honest I'd stay away from Subaru as thir AWD system is 90% FWD, and AWD when needed - whereas the BMW is RWD all the time, and AWD when needed.
However, the amount that you would have to change to integrate a subaru drivetrain into an FC would be prohibitive....however, what about dropping a 13BT in an Impreza? Food for thought.
#25
Originally posted by Thingol
Sorry, but this is only %50 correct. That is true for Automatic subies, which use an electronically controlled clutch to transfer power......HOWEVER, the manual subarus have a viscous center coupling, which runs torque 50/50 until there is a slip. There is also a new AWD system they are implementing with their H6 3.0 VDC cars, that normallt gives the car a rear bias for increased handling, even with the auto....more reading here.
Sorry, but this is only %50 correct. That is true for Automatic subies, which use an electronically controlled clutch to transfer power......HOWEVER, the manual subarus have a viscous center coupling, which runs torque 50/50 until there is a slip. There is also a new AWD system they are implementing with their H6 3.0 VDC cars, that normallt gives the car a rear bias for increased handling, even with the auto....more reading here.
I was under the assumption that the AWD systems in old Subarus (ones old enough to be in a junkyard as he said at the top) were primarily FWD. I knew that their newer models - most notably the Impreza had a more even distribution of drive but I didn't know there was a difference in auto - versus manual. Were Subaru's always 50/50 in their 5spd AWD's? If so - I stand corrected. I've only owned 2WD ones.....