what psi w/ this setup?
#1
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Jan 2002
Location: Pensacola, FL
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
what psi w/ this setup?
I'll initially have an E6K, injectors, fuel pump, radiator, and a boost controller. With the stock exhaust, intercooler, and turbo, what boost could I safely run? Also, since I'm planning on needing the fuel down the line, I'm planning on getting 720 primaries with 1600 secondaries. Is this too much for running what I'll initially be running? If so, will the E6K take care of it?
#2
SOLD THE RX-7!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
with the stock exhuast I wouldn't run over 8 or so. the turbo will just get way to hot and over stress itself if you go over. get a down pipe and an exhaust.
2x720 and 2x1600 is probably good for around 700hp. a stock turbo won't make 300...
2x720 and 2x1600 is probably good for around 700hp. a stock turbo won't make 300...
#3
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (2)
Join Date: Apr 2001
Location: Salt Lake City, UT
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
what year of car are we talking here. If its the 5series turbo I think you could run a little more than 8 and be safe if its the 4series then 8 if prob the limit. 8 is really fun though. I hit 10 on the stock turbo sometimes, but I have other goodies, and thats natural boost.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM