What other bushings do i need for the miata short shifter
#1
MattB
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Apr 2005
Location: Haverhill, MA
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
What other bushings do i need for the miata short shifter
ok, so i was reading about the miata short shifter, and i need a little more clear help. the other thread kinda went around in circles and i got sick of reading so i just need a quick answer here.
if i was to buy this...
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
what other bushings do i need, and where can i get them?
-Matt
If i get the bushings i wouldnt mind doing a write up for the archives as i install this
if i was to buy this...
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
what other bushings do i need, and where can i get them?
-Matt
If i get the bushings i wouldnt mind doing a write up for the archives as i install this
#4
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Jul 2004
Location: Waco Texas
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
If that will bolt up then that should work. I had to get both upper and lower bushings for mine and got it through victoria british for roughly 20 bucks. They help out a ton! Let us know how well the install goes, if it works out well then ill have to buy this setup as well.
EDIT: looking at the pick the upper bushing appears to already be there.
EDIT: looking at the pick the upper bushing appears to already be there.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM