What Intercooler can i use from another car? Advantages? Dis?
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Queens, NY-----Rockland, NY(School)
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
What Intercooler can i use from another car? Advantages? Dis?
I know the starion and conquest, but what other cars are a good fit?
what are the advantages and disadvantages of a FMIC?
i know it cools better, but isthe lag worse?
what are the advantages and disadvantages of a FMIC?
i know it cools better, but isthe lag worse?
#2
RX-7 Bad Ass
iTrader: (55)
We just had a topic going on this conversation - it's called "DIY front mount" or something.
Long story short, the Starion intercooler is junk. The easiest part of the front mount equation is the intercooler - get something worthy to begin with. DSM guys have proven the Starion is worse than the stock DSM intercoolers, which suck .
When I first upgraded to a front mount, I actually noticed BETTER throttle and boost response. The stock IC is so restrictive, you're seriously choking your input charge down.
IMHO, the best option out there is the new Greddy front mount - for under $900, you can have a big, top-quality front mount with good piping and a massive throttle body elbow. It's a real hard deal to beat.
That said, the only "cheapie" intercooler that IMHO is worth bothering with is the NPR. But, the intercooler is the easiest part of the equation - running and fabbing the pipes will kill ya.
Dale
Long story short, the Starion intercooler is junk. The easiest part of the front mount equation is the intercooler - get something worthy to begin with. DSM guys have proven the Starion is worse than the stock DSM intercoolers, which suck .
When I first upgraded to a front mount, I actually noticed BETTER throttle and boost response. The stock IC is so restrictive, you're seriously choking your input charge down.
IMHO, the best option out there is the new Greddy front mount - for under $900, you can have a big, top-quality front mount with good piping and a massive throttle body elbow. It's a real hard deal to beat.
That said, the only "cheapie" intercooler that IMHO is worth bothering with is the NPR. But, the intercooler is the easiest part of the equation - running and fabbing the pipes will kill ya.
Dale
#6
Banned. I got OWNED!!!
Join Date: Sep 2001
Location: Pensacola, FL
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Most good front mounts won't increase lag, or lower your boost. Some of the junk people put in the front of their cars will though. And with that.....say this with me.
S E A R C H
Daniel
S E A R C H
Daniel
Trending Topics
#8
Senior Member
Join Date: Nov 2001
Location: Boothbay Harbor, ME
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
Brian P, I would be interested in reading a write up about the steps involved in the procedure you used to install that FMIC in your picture. I am 17 and low on cash flow, so any DIY mod is a great one for me. Thanks.
#9
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Queens, NY-----Rockland, NY(School)
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Brian P: thanks for the pics, which volvo is that IC from? did you get that in a junk yard or something?
the set up looks good.
so it was much better with the front mount?
i deffinally wanna make this change.
mike
the set up looks good.
so it was much better with the front mount?
i deffinally wanna make this change.
mike
#13
Rotary Enthusiast
Join Date: Mar 2001
Location: Ft. Worth, Texas, USA, Earth, Solar System...
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Funklord
mkiii supra???
dont wast your time with that inter-heater.
mkiii supra???
dont wast your time with that inter-heater.
Brad
#14
Rotary Enthusiast
Join Date: Mar 2001
Location: Ft. Worth, Texas, USA, Earth, Solar System...
Posts: 1,273
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dcfc3s
We just had a topic going on this conversation - it's called "DIY front mount" or something.
Long story short, the Starion intercooler is junk. The easiest part of the front mount equation is the intercooler - get something worthy to begin with. DSM guys have proven the Starion is worse than the stock DSM intercoolers, which suck .
When I first upgraded to a front mount, I actually noticed BETTER throttle and boost response. The stock IC is so restrictive, you're seriously choking your input charge down.
IMHO, the best option out there is the new Greddy front mount - for under $900, you can have a big, top-quality front mount with good piping and a massive throttle body elbow. It's a real hard deal to beat.
That said, the only "cheapie" intercooler that IMHO is worth bothering with is the NPR. But, the intercooler is the easiest part of the equation - running and fabbing the pipes will kill ya.
Dale
We just had a topic going on this conversation - it's called "DIY front mount" or something.
Long story short, the Starion intercooler is junk. The easiest part of the front mount equation is the intercooler - get something worthy to begin with. DSM guys have proven the Starion is worse than the stock DSM intercoolers, which suck .
When I first upgraded to a front mount, I actually noticed BETTER throttle and boost response. The stock IC is so restrictive, you're seriously choking your input charge down.
IMHO, the best option out there is the new Greddy front mount - for under $900, you can have a big, top-quality front mount with good piping and a massive throttle body elbow. It's a real hard deal to beat.
That said, the only "cheapie" intercooler that IMHO is worth bothering with is the NPR. But, the intercooler is the easiest part of the equation - running and fabbing the pipes will kill ya.
Dale
I hate to question you on anything... but what about the MK III Supra unit? See my comments above.
Brad
#15
Full Member
Join Date: Jul 2002
Location: Newton, NC
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Question: What model Volvo was the intercooler from. I am not up on Volvo's. But apperantly I should get caught up on them. This is the same route that a couple people on the 240sx.ORG have taken.
Halo
Halo
#16
Full Member
Join Date: Jul 2001
Location: Vancouver, BC, Canada
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
I'm pretty sure that all turbo volvo's have this intercooler, its really easy to make piping out of ABS plastic tubing. Home depot has everyting that you need to make it work.
The IC just sits between the rad and the rad support. The rad is moved back with some flat bar bent into a 'U" shape,
Here are some pics
I got it from a junkyard. You could probably get it really cheap if you tell them its a radiator . I noticed a huge difference once I put it in.
The IC just sits between the rad and the rad support. The rad is moved back with some flat bar bent into a 'U" shape,
Here are some pics
I got it from a junkyard. You could probably get it really cheap if you tell them its a radiator . I noticed a huge difference once I put it in.
Last edited by AdamP; 08-22-02 at 07:02 PM.
#18
Originally posted by AdamP
I got it from a junkyard. You could probably get it really cheap if you tell them its a radiator . I noticed a huge difference once I put it in.
I got it from a junkyard. You could probably get it really cheap if you tell them its a radiator . I noticed a huge difference once I put it in.
#19
20b Tinkerer
iTrader: (1)
Join Date: Jan 2002
Location: TX
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
I would have to say the Greddy is the best buy. the piping (if you get metal) is such a PITA to get. next to that I would say the NPR then the volvo. I hear many good things about the NPR's. Also, i was told (by Jspecracer7 who did the test ...) that when 2 intercoolers were compared 1 with alot of surface area, and the other with more thickness and less surface area. The cooler w/ more thickness came out 4 or so deg/ cooler at WOT than the other.. oh well, your choice..
#20
Sick & Twisted
Join Date: Dec 2001
Location: FT Lauderdale, Fl
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AdamP
I'm pretty sure that all turbo volvo's have this intercooler, its really easy to make piping out of ABS plastic tubing. Home depot has everyting that you need to make it work.
The IC just sits between the rad and the rad support. The rad is moved back with some flat bar bent into a 'U" shape,
Here are some pics
I got it from a junkyard. You could probably get it really cheap if you tell them its a radiator . I noticed a huge difference once I put it in.
I'm pretty sure that all turbo volvo's have this intercooler, its really easy to make piping out of ABS plastic tubing. Home depot has everyting that you need to make it work.
The IC just sits between the rad and the rad support. The rad is moved back with some flat bar bent into a 'U" shape,
Here are some pics
I got it from a junkyard. You could probably get it really cheap if you tell them its a radiator . I noticed a huge difference once I put it in.
i noticed u have an e-fan....did u have to put that on in order for the ic to work or did u already have it?....also im assumin that was the only way of mountin it?....i don't have an e-fan so about how far back did u move the rad.....was it far enough to where the stock fan won't work?.....with this FL heat i don't want to risk any coolin problems.....thnx
#23
Senior Member
Join Date: Aug 2002
Location: Honolulu
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Kinda harsh huh liquid?
I wouldnt bother putting the volvo with PLASTIC endtanks. I dont even like the plastic on my radiator. For all the effort of mounting the FMIC Id just try and do it right.
Im building 2 stock fc cores in parellel with custom endtanks. Really I dont expect much pressure drop but this wont be easy. Having a tig helps. The cores look like they are good quality, just kinda small. I cant justify 900 on a FMIC. granted its important I just want to try a diffrent path. $50 for the extra core and the cost of pipe. Other than my time Ill have a decient IC for cheap.
I wouldnt bother putting the volvo with PLASTIC endtanks. I dont even like the plastic on my radiator. For all the effort of mounting the FMIC Id just try and do it right.
Im building 2 stock fc cores in parellel with custom endtanks. Really I dont expect much pressure drop but this wont be easy. Having a tig helps. The cores look like they are good quality, just kinda small. I cant justify 900 on a FMIC. granted its important I just want to try a diffrent path. $50 for the extra core and the cost of pipe. Other than my time Ill have a decient IC for cheap.
#24
We come with the Hardcore
iTrader: (2)
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Seems I'm being harsh latly. Eh, I'm just saying what's on my mind.
People have done the 2 stock core thing, with supposedly very good results. Whenever you're done take pics. I'd like to see what the finished product looks like.
People have done the 2 stock core thing, with supposedly very good results. Whenever you're done take pics. I'd like to see what the finished product looks like.