2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Well It's Officially Undrivable...

Thread Tools
 
Search this Thread
 
Old 03-28-04 | 12:22 PM
  #1  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
Unhappy Well It's Officially Undrivable...

As some of you know, i have had a "really bad Miss" at various rpm's.....Well today i went to go wash and fill her up with gas when......

I push on the gas pedal even in neutral (like reving it) it misses like crazt and basically i can't even drive it now, it'll drive but just shutters and misses the whole time...I'm kinda screwed because this is my daily driver.... my wife is at church and all my spare parts are 18 miles away at my mother in laws house. anyways I am going to hitch a ride out there what parts should i bring back? I have already replaced the fuel filters, intank too, spark plug wires, i have regrounded the motor....new tps

what else could it be?

here's the parts i have availible...

alternator, cpu, coils, bac, i don't have injectors and i don't think the other fuel pump i have is good..

ugnhh

trevor
Old 03-28-04 | 01:13 PM
  #2  
Molotovman's Avatar
Ban Peak
iTrader: (49)
 
Joined: Jul 2002
Posts: 4,045
Likes: 437
From: Northern Virginia
bad engine?
Old 03-28-04 | 01:47 PM
  #3  
Josepi's Avatar
Despise Enmity
 
Joined: May 2001
Posts: 2,420
Likes: 0
From: Richmond, VA
Originally posted by Molotovman
bad engine?
Poor compression wouldn't cause a miss at various RPMs.
Old 03-28-04 | 01:55 PM
  #4  
Josepi's Avatar
Despise Enmity
 
Joined: May 2001
Posts: 2,420
Likes: 0
From: Richmond, VA
Try throwing a timing light on both leading wires and see if you're getting spark or not at the miss.
Old 03-28-04 | 02:06 PM
  #5  
maddogg20's Avatar
Junior Member

 
Joined: Feb 2004
Posts: 19
Likes: 0
From: california
sounds like it could be your TPS sensor, mine had that id start it and itdd miss like crazy and shake and **** but when it hit higher rpms it was ok and at idle itdd like pulse and stuff like rev up and down. anyway try taking the sensor off and spraying the moving part with wd40 and like shaking it to get any crap out thats in it. It worked for me. I hope this is of some help to you. good luck bro.
Old 03-28-04 | 02:17 PM
  #6  
maddogg20's Avatar
Junior Member

 
Joined: Feb 2004
Posts: 19
Likes: 0
From: california
sounds like it could be your TPS sensor, mine had that id start it and itdd miss like crazy and shake and **** but when it hit higher rpms it was ok and at idle itdd like pulse and stuff like rev up and down. anyway try taking the sensor off and spraying the moving part with wd40 and like shaking it to get any crap out thats in it. It worked for me. I hope this is of some help to you. good luck bro.
Old 03-28-04 | 03:43 PM
  #7  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
I replaced the sensor so i doubt it is that.....

I'll check it though. The compressing is great so i know it's not blown......

trevor
Old 03-28-04 | 03:49 PM
  #8  
jon88se's Avatar
Eat, sleep, work, mod.
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
air flow meter
Old 03-28-04 | 04:48 PM
  #9  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
OK update- i just replaced the CAS, the alternator, the trailing coils, the tps is fine, and retimed it. I am going out to change the mafs right now, then it's off tho autozone to checkon a cpu.......
Old 03-28-04 | 05:26 PM
  #10  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
Ok still nothing damnit........mafs wasn't it.... off to the ZONE!
Old 03-28-04 | 05:53 PM
  #11  
SonicRaT's Avatar
Super Raterhater
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Does it idle roughly/poorly? At what RPM does it idle? Almost every time i've had a hesitation it's been due to vac leaks
Old 03-28-04 | 06:04 PM
  #12  
ddub's Avatar
i am legendary

 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
Have you checked all your grounds? Not just the engine one. I know I had some hesitations/missing at rpms, very slightly though not to the degree of you, and then I redid all my grounds in the grounding how-to plus a couple more and all my hesitations and everything went away. This is adding grounds to the coils, engine, replacing the negative battery terminal ground to the body and then to the block, ecu ground, boost sensor, uhm the one under the UIM, i can't remember them all. I have the how-to and pics (not very good ones but still gives you an idea) from the archives on my comp if you want it.
Old 03-28-04 | 06:04 PM
  #13  
jon88se's Avatar
Eat, sleep, work, mod.
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
a vacuum leak on an NA wont cause the car to hesitate so severly that it won't run...you never mentioned if you checked the plugs - what if the electrode on one or more is completely gone. check the fuel pump for proper operation as well.
Old 03-28-04 | 08:27 PM
  #14  
andrew lohaus's Avatar
Rotary Enthusiast

 
Joined: Jan 2003
Posts: 1,255
Likes: 0
From: fl
since when has autozone carried MAF's??????
Old 03-28-04 | 08:46 PM
  #15  
jon88se's Avatar
Eat, sleep, work, mod.
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
he said he tried a MAF - I think he was going to autozone to see what they diagnose the car with
Old 03-28-04 | 08:49 PM
  #16  
drago86's Avatar
Rotary Enthusiast
 
Joined: Oct 2002
Posts: 1,165
Likes: 0
From: California, Bay Area
sounds like definatly fuel,.. check the pump? FPR? pressure? injectors?
Old 03-28-04 | 09:34 PM
  #17  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
Ok well, I put a timing light on the car and had my brother in law rev it up to the point where it started missing...I put the "clamp" on the leading coil and the light got to the point where it was flashing so fast it was solid, now when i put it on the trailing coil it would flash normal in the low rpms and disapear when it started missing (around 4.1k) Now these are new coils so i know the coils are good, i replaced the Crank angle sensor with one off a running car and that didn't help, the plugs have been inspected and are fine, I'm going to the junk yard tommorrow to find a cpu. Autozone doesn't carry them (suprised?). Any way i also replaced the bac valve and i am going to add a couple more grounds i guess. Thanks again but keep the sudjestions comming

here is the NEW list of things i've tried replacing.

Alternator
MAF
Coils (leading and trailing)
Crank angle sensor
Plugs
Wires
TPS
Fuel filters

It really seem to be electrical, if it were fuel the coil would't stop firing would it?
Old 03-28-04 | 09:35 PM
  #18  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
What about voltage regulator...what does that do? where is it ? could that be it? Crap!!!!
Old 03-28-04 | 10:37 PM
  #19  
jon88se's Avatar
Eat, sleep, work, mod.
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
thats in the alternator so nix that...I still think it sounds like a fuel problem. maybe you have an injector stuck open...it dumps fuel and the car breaks up. ECU's very very rarely go bad.
Old 03-28-04 | 11:46 PM
  #20  
Madejelly

 
Joined: Mar 2004
Posts: 28
Likes: 0
From: Gainesville, FL
u might have a short in ur elcetical system some where
Old 03-28-04 | 11:55 PM
  #21  
jon88se's Avatar
Eat, sleep, work, mod.
 
Joined: Jun 2001
Posts: 2,517
Likes: 0
From: Long Island
doubtful that there could be such an electrical problem that would only effect engine operation. check the harness for exposed or grounded wires just in case...
Old 03-29-04 | 12:04 AM
  #22  
eyecandy's Avatar
Rotary Freak
iTrader: (19)
 
Joined: Sep 2002
Posts: 2,926
Likes: 1
From: Pittsburgh,PA
I know you mentioned the sprak plugs are fine, but how old are they? I would strongly recommend changing them. I did taht in mine it it help some of the problems I was having. BTW are the spark plug wires showing any signs of arching? If they you migh need to replace those as well..
Old 03-29-04 | 12:04 AM
  #23  
totallimmortal's Avatar
Is that thing Turbo?

 
Joined: Jan 2004
Posts: 1,411
Likes: 0
From: Maryland
Hmm well this thread will give me something to think about while i fall asleep tonite. Seems like you've hit almost everything already, I'd say check the injectors just in case, but it really sounds ignition related to me
Old 03-29-04 | 12:11 AM
  #24  
RRTEC's Avatar
Thread Starter
Rotartist
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
That's what i was thinking considering the fact that it isn't flooding and car will run and idle ok, so i don't think it's fuel pump.... but what else is there to the ignition system besides coils, plugs wires, cas? is the ecu even in the mix there? It's like i have a problem never incountered before........at least according to the search function anyways...which isn't working right now anyways........
Old 03-29-04 | 01:16 AM
  #25  
suprfast7's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 315
Likes: 0
From: GA
I had a problem with my 7 at higher RPMs the sencondary injector somehow got unplugged from the harness



All times are GMT -5. The time now is 01:23 PM.