Walmart 'stuff'
01-20-03, 10:20 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2002
Location: coral springs florida
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Walmart 'stuff'
After much diagnostic checkin and **** i have come to the conclusion that the exaust seal is blown now lets just say i went to walmart and put in that coolant system seal **** does anybody at all think it will solve some of the problem? just lookin for a cheap and easy alternative to a rebuild and the back of the bottle says permanitly repairs blown heads head gastkets and **** like that any input is great 
Last edited by mazdamanda; 01-20-03 at 10:31 PM.
01-20-03, 10:32 PM
#3
Flinstone Power
Join Date: Nov 2001
Location: Cleveland, Ohio
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
its works about as good and mixing MM oil with J-B weld and pouring it in your TB.. accually i dont know how it will work.. i had a S10 with a bad rad and i poured it in there and it stopped the rad leak.. hell if it needs rebuilt anyways i would go for it to see what happens..
Dave
Dave
01-20-03, 11:19 PM
#4
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
there is no exhuast seal... are you talking water seals? if so you can try that.. do a seach there was a lenthy write up on how to do it. involving mutiply flushes.
if you're talking apex seals. nothing you can do but rebuild or replace.
if you're talking apex seals. nothing you can do but rebuild or replace.
01-21-03, 05:26 PM
#6
Junior Member
Thread Starter
Join Date: Dec 2002
Location: coral springs florida
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
well see heres my problem after running it after a few minutes it starts to shoot out like steam but it isnt hot and the rx7 isnt over heating the temp gauge is right where it should be it seems to have excessive pressure too is it the apex seals?
01-21-03, 09:37 PM
#7
pei > caek
Join Date: May 2002
Location: Mars
Posts: 4,643
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Scott 89t2
there is no exhuast seal... are you talking water seals? if so you can try that.. do a seach there was a lenthy write up on how to do it. involving mutiply flushes.
there is no exhuast seal... are you talking water seals? if so you can try that.. do a seach there was a lenthy write up on how to do it. involving mutiply flushes.
Originally posted by blazin91dan
well see heres my problem after running it after a few minutes it starts to shoot out like steam but it isnt hot and the rx7 isnt over heating the temp gauge is right where it should be it seems to have excessive pressure too is it the apex seals?
well see heres my problem after running it after a few minutes it starts to shoot out like steam but it isnt hot and the rx7 isnt over heating the temp gauge is right where it should be it seems to have excessive pressure too is it the apex seals?
Thread
Thread Starter
Forum
Replies
Last Post