RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Vote! What type of wheels do you have on your FC?! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/vote-what-type-wheels-do-you-have-your-fc-16511/)

13BAce 08-21-01 06:16 PM

18x8 and 18x9 Konig Villains:

phinsn98 08-21-01 09:02 PM

Fikse FM10 17x8 225 40ZR 17 front 17x8.5 255 40ZR 17 rear

Later,
Dave

SuperchargedRex 08-21-01 09:14 PM

Gotta love those phone dials....

BOOSTD 7 08-22-01 01:58 AM

I'm gonna have these as soon as Rishie can get them for me!

http://www.work-wheels.co.jp/wheels/...ts2/main_1.jpg

ROSHX7 08-22-01 02:48 AM

Re: roshx7`
 

Originally posted by mazda7
roshx7 where did you and allen get the clear markers for the front blinkers. I made my own but yours look factory. Also give away the secret on the lowered ride height. I use eibachs but not quite low enough.

as for my wheels, stock gtu for now

If it looks FACTORY, then I must have done a good job! Nothing special for our clears. Allen found something at Home depot and I cut it precisely to fit, that's all. As for our suspension...nothing I could find lowered it quite enough for my taste, so I simply cut a coil off my spring! Just cut a coil off your eibachs, should work just as good, just a bit bumpier.

FoXX 08-22-01 05:21 AM

http://www.goldcoast.webcentral.com.au/cars/rx72.jpg

1FastT2 08-22-01 06:20 AM


Originally posted by BOOSTD 7
I'm gonna have these as soon as Rishie can get them for me!

http://www.work-wheels.co.jp/wheels/...ts2/main_1.jpg

Those are nice!

RX AGENT 08-22-01 10:40 AM

16 inch Enkei RPO2's........

http://a9.cpimg.com/image/99/2E/5405...-02000152-.jpg

87GTR 08-22-01 10:48 AM

I wounder how much those Enkei RPO2's weight. they look almost like my stock 3rd gen wheels.

http://rx7.cyberosity.com/87GTR/tonygtr0001s.jpg

RX AGENT 08-22-01 10:51 AM


Originally posted by 87GTR
I wounder how much those Enkei RPO2's weight. they look almost like my stock 3rd gen wheels.

http://rx7.cyberosity.com/87GTR/tonygtr0001s.jpg


I think they're around 17lbs.....

ZachSpazz 08-22-01 11:40 AM

I'm personally a fan of the 89-91 stock TII wheels...besides the BBS 'Vert wheels, they are the best looking stock rims out there for FCs.

Erik 08-22-01 10:23 PM



i've got 17x7's all around. they are Volk TE-37 look-a-likes. same mold, same stickers...just cast instead of forged aluminum. so, a little heavier...but damn, i LOVE the way they look :)

OPEC 08-22-01 11:42 PM

3 peice Racing Hart C5's
17x9.5 rear 255/40
17x8 front 235/40

http://students.uwf.edu/jkd1/avatar/whity016a.jpg

Winnipeg85GSL 08-23-01 01:26 AM

I love white wheels. 87 GTR and erik have em :yum: :1party:

Felix Wankel 08-23-01 01:41 AM


Originally posted by BOOSTD 7
I'm gonna have these as soon as Rishie can get them for me!

http://www.work-wheels.co.jp/wheels/...ts2/main_1.jpg

I think I just soiled myself! :yum:

Mykl 08-23-01 01:59 AM


Originally posted by rx7_ragtop


I have these too... look good. I am trying to get a set of the 16x7.5" BBS rims from the Infini though- look the same, but allow a bit more rubber under there. (Perhaps 245-50-16?) That would take wider front fenders though... maybe I'll stick with 225's.

Brad

That would be sweet, I'd love to get a set of those. I love my stock BBS's, but 15"s are just way too damn small.

Mykl 08-23-01 01:59 AM


Originally posted by Felix Wankel


I think I just soiled myself! :yum:

I keep rags near my computer for pics like that. :)

Sebring7 08-23-01 01:06 PM


Originally posted by Winnipeg85GSL
I love white wheels. 87 GTR and erik have em :yum: :1party:
ya - white is nice :D

Project RX-7 08-23-01 07:27 PM

1FastT2
 
1FastT2: you got any more pics of your car?

DyNaMiTe KiD 08-23-01 10:08 PM

talkin bout tires n stuff.. what u guyz think bout 225/40/17 all around?? will i have a problem?

thanks

SupSai7 08-25-01 06:46 AM

I have my stock mesh wheels on my white 89' TII, I was thinking about 17's in the near future. But it's so damn hard to pick out a set of clean lookin wheels for it. I was thinkin about the white enkie's (spelling?) I saw in a import mag ad on a white miata. But they look a little bit heavy (i'm all bout' perf. over looks). But those wheels on the skyline are sweeet!:eek: ahh too many desicion's.:)

PaulC 08-25-01 06:04 PM

Im running the stock T2 wheels with the 10 slotted openings that have been so previlantly displayed in this thread. However, mine are going to be powdercoated white when My car gets painted IROC blue. :blue:

SpeedRacer 09-06-01 02:27 PM

I have stock 91 rims on my 90GTU(don't ask) but I also have a set of 16x8" Volk Racing TE-37's that I haven't gotten tires for yet...those are badass rims(see pic of Eriks car above, mine looks exactly like that(or will once i get the Volk Racing Rims on)

Ryan "RX-7" Radio 09-06-01 09:49 PM

Dynalite 2-piece.


http://www.mentallychallenged.com/mvc-004f.jpg

89turbo2dutch 09-06-01 10:06 PM

SWEEEEEET!
 
Hey Ryan,

I love those rims. I've described them a dozen times as the ones I think would look sweet as hell on my TII. Never knew until now who makes them. Yeah, I forgot to mention that on Monday. All the ads in the magazines have either 90 variations on the five spoke or some alien looking chrome crap design.

Didn't Porsche use that design on 944's??

I also loved the BBS rims that came stock on my 88 vert. Wish they were 16s

Mike


All times are GMT -5. The time now is 09:29 AM.


© 2024 MH Sub I, LLC dba Internet Brands