Vibration only when turning right
#1
Junior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Nov 2004
Location: San Antonio, TX
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://www.rx7club.com/images/icons/icon5.gif)
Definately in the rear, driver-side. while driving straight or making left turns, the noise is not there. any kind of right turns (slight or full) noise. recently replaced rear struts and springs (what a difference) and the diff mount. no front sway bar...
removed and checked lateral links
ball joints and arm seem great. no bends or tears in boots.
with the lateral links and struts removed, i grabbed the rotor and checked for play laterally (pushing and pulling on the rotor). there little play on the passenger side, but there was noticabley much more play in the drivers side.
leaving me to believe either the main control arm bushing is destroyed or the little camber link is worn.
what'd yall think?
removed and checked lateral links
ball joints and arm seem great. no bends or tears in boots.
with the lateral links and struts removed, i grabbed the rotor and checked for play laterally (pushing and pulling on the rotor). there little play on the passenger side, but there was noticabley much more play in the drivers side.
leaving me to believe either the main control arm bushing is destroyed or the little camber link is worn.
what'd yall think?
Thread
Thread Starter
Forum
Replies
Last Post
RyanFox
New Member RX-7 Technical
7
09-18-15 09:09 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM