Vacuum Block Issues/Routing
#1
Vacuum Block Issues/Routing
I have a vacuum block I'm making out of brass fittings. Currently I have my boost gauge (1/8" nylon line), GM MAP sensor (3/16"x12" [needs to be 1/4"]), and FPR (5/32") run off of a single line (5/32") from the manifold. I'm concerned that there's going to be a pressure drop or something from feeding so many things from one 5/32" line.
Is this going to cause any issues?
Is this going to cause any issues?
#2
I would say that it won't. I assume you're doing this for a standalone (from the GM MAP sensor, it looks like you are). In my personal experience, the more dampening in the line for the MAP sensor the better.
What kind of setup are you running to where you have a shortage of vacuum ports anyways?
What kind of setup are you running to where you have a shortage of vacuum ports anyways?
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
PinkRacer
2nd Generation Specific (1986-1992)
43
10-01-15 09:13 AM