Turn signals don't work HELP!!!!!!!!
08-28-05, 11:04 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Middletown,CT
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Turn signals don't work HELP!!!!!!!!
Hey Guys,
My 88' rx7 non turbo is acting up. My emergency flashers and parking lights both function front and rear both sides, but my turn signals wont work. I checked the connection behind the gauge cluster bezel and everything is plugged in. There is one plug on the right side of the bezel that doesn't plug into anything, believe me I looked. All the fuses in the car are operable also. I can't find any shorts either.
I am a MECP certified installer and I can usually figure these things out but this has me stumped. Please post some advice because I need to get this thing to pass the CT safety inspection before I can register it. I really hate state vehicle regulations sometimes. Thanks for looking and please try to help me out.-Drew
My 88' rx7 non turbo is acting up. My emergency flashers and parking lights both function front and rear both sides, but my turn signals wont work. I checked the connection behind the gauge cluster bezel and everything is plugged in. There is one plug on the right side of the bezel that doesn't plug into anything, believe me I looked. All the fuses in the car are operable also. I can't find any shorts either.
I am a MECP certified installer and I can usually figure these things out but this has me stumped. Please post some advice because I need to get this thing to pass the CT safety inspection before I can register it. I really hate state vehicle regulations sometimes. Thanks for looking and please try to help me out.-Drew
08-29-05, 12:53 AM
#2
Former Moderator. RIP Icemark.
Probably a bad CPU flasher board. Common if the Hazards work but lfashers don't.
But double check the switch is plugged in first. Do the high beams work?? if so, the switch is plugged in. and the CPU flasher board is probably bad.
If they do not, then your problem is at the switch.
I have rebuilt CPU flasher boards available on my webstore/website.
But double check the switch is plugged in first. Do the high beams work?? if so, the switch is plugged in. and the CPU flasher board is probably bad.
If they do not, then your problem is at the switch.
I have rebuilt CPU flasher boards available on my webstore/website.
