Turbocharged NA runs! Video Inside!
#26
Full Member
Join Date: Feb 2002
Location: Dallas, TX
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Felix Wankel
I knew it would run.
On a side note, your head doesn't flop like the Canadians on South Park. What gives?
I knew it would run.
On a side note, your head doesn't flop like the Canadians on South Park. What gives?
#28
Engine, Not Motor
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
Thanks again!
I've never watched South Park, so I don't know about the head shaking thing...That show is just too low brow for me. Potty humour...
As far as the car, I hit 5 PSI on the way home from work...Managed to break the tires loose in 2nd gear, but saw orange on the A/F guage. So I will have to probably decrease fuel around 3500 RPM, and increase from 4000RPM up in high throttle. Low throttle needs a lot less fuel at around 4K.
FWIW, the car hits boost HARD. Hardly any noticable lag at all. Everything sounds good. Turbo whistles, BOV valves...uh...blows off, transmission screams for mercy.
I will have to add a heat shield to the turbo since that thing is just a massive heat source under the hood, and my oil cooler lines seem to be leaking slightly. One is leaking at one of the connections, so it may just be loose. I'll try tightening, and if that doesn't fix it, stop by the hose shop and have them take a look. My hoses are lifetime guaranteed to 500 PSI, so they should not be leaking at ~60 PSI. Oh well, if that's the only problem I have, I'll be happy.
I've never watched South Park, so I don't know about the head shaking thing...That show is just too low brow for me. Potty humour...
As far as the car, I hit 5 PSI on the way home from work...Managed to break the tires loose in 2nd gear, but saw orange on the A/F guage. So I will have to probably decrease fuel around 3500 RPM, and increase from 4000RPM up in high throttle. Low throttle needs a lot less fuel at around 4K.
FWIW, the car hits boost HARD. Hardly any noticable lag at all. Everything sounds good. Turbo whistles, BOV valves...uh...blows off, transmission screams for mercy.
I will have to add a heat shield to the turbo since that thing is just a massive heat source under the hood, and my oil cooler lines seem to be leaking slightly. One is leaking at one of the connections, so it may just be loose. I'll try tightening, and if that doesn't fix it, stop by the hose shop and have them take a look. My hoses are lifetime guaranteed to 500 PSI, so they should not be leaking at ~60 PSI. Oh well, if that's the only problem I have, I'll be happy.
#29
Senior Member
Join Date: Feb 2001
Location: Tallahassee, FL
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Way to go Aaron!
Instead of moving on to your next project have you considered offering your creation as a kit? You know, a real working NA->turbo conversion at a real good price that everybody with an NA will ask you a million questionsa about, but nobody actually buys
Oh wait, that's been done already too
Instead of moving on to your next project have you considered offering your creation as a kit? You know, a real working NA->turbo conversion at a real good price that everybody with an NA will ask you a million questionsa about, but nobody actually buys
Oh wait, that's been done already too
#30
QC Motorsports
Join Date: Jan 2002
Location: Austin, tx
Posts: 759
Likes: 0
Received 0 Likes
on
0 Posts
Sweet job Aaron. I good tidings on you and your car. May the car gods give her a long lifetime as a turbo N/A. But now we can't really say that she is a turbo N/A can we. So a sweet *** turbo. Tina is a good name.
Charles
Charles
#31
Engine, Not Motor
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
Update: I blew my engine this morning. No compression on the rear rotor.
Just kidding! I actually drove my mom to work this morning, and said something like:
Me: Want to know what boost is?
Her: No
Me: *floors pedal*
Her: Holy ****!
LOL. It was priceless. I didn't do any tuning last night because I decided that a full wash, wax and detail was more important for the time being. The car is running REALLY rich everywhere but idle, so I really need to sit down for a few hours and just mess with the S-AFC.
As I was coming back from lunch today, there was this ricer that kept getting lined up with me at intersections...3 or 4 of them at least...He kept revving his fart tip equipped Corolla until I finally looked over:
Him: Nice car. Is it fast?
Me: *is he serious?* Um, yeah.
Him: Race?
Me: No
Him: *****.
Me: *roll up window, crank "Du Hast"*
...light turns green...
Me: What the hell...*floors it*
Spun the tires through first gear, spun them into second...looked at the boost guage...8PSI?!? Yikes...A/F nearing the endo the orange...this is bad. Let of throttle and stop at next light. The ricer guy shows up about 10 seconds later and pulls up behind me... LOL.
Also, I have put a copy of those vidoes on the server at work. Please don't hammer it since it is used for other things besides my videos...
http://www.vltpm.com/aaron_videos/Ti... Of Engine.avi
http://www.vltpm.com/aaron_videos/Ti...(Exterior).avi
http://www.vltpm.com/aaron_videos/Ti...(Interior).avi
Just kidding! I actually drove my mom to work this morning, and said something like:
Me: Want to know what boost is?
Her: No
Me: *floors pedal*
Her: Holy ****!
LOL. It was priceless. I didn't do any tuning last night because I decided that a full wash, wax and detail was more important for the time being. The car is running REALLY rich everywhere but idle, so I really need to sit down for a few hours and just mess with the S-AFC.
As I was coming back from lunch today, there was this ricer that kept getting lined up with me at intersections...3 or 4 of them at least...He kept revving his fart tip equipped Corolla until I finally looked over:
Him: Nice car. Is it fast?
Me: *is he serious?* Um, yeah.
Him: Race?
Me: No
Him: *****.
Me: *roll up window, crank "Du Hast"*
...light turns green...
Me: What the hell...*floors it*
Spun the tires through first gear, spun them into second...looked at the boost guage...8PSI?!? Yikes...A/F nearing the endo the orange...this is bad. Let of throttle and stop at next light. The ricer guy shows up about 10 seconds later and pulls up behind me... LOL.
Also, I have put a copy of those vidoes on the server at work. Please don't hammer it since it is used for other things besides my videos...
http://www.vltpm.com/aaron_videos/Ti... Of Engine.avi
http://www.vltpm.com/aaron_videos/Ti...(Exterior).avi
http://www.vltpm.com/aaron_videos/Ti...(Interior).avi
Last edited by Aaron Cake; 06-18-02 at 11:39 AM.
#32
brap brap
Originally posted by RETed
One word of warning...
That DIVX site downloads Gator/GMT files which is considered spyware/adware.
-Ted
One word of warning...
That DIVX site downloads Gator/GMT files which is considered spyware/adware.
-Ted
#35
Full Member
Join Date: Jan 2002
Location: Port Orchard, Washington
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Way to go Aaron! There's nothing finer/better than seeing something you built/designed with your own two hands come to life. Unless people have built a project like this, they don't know what real doubt is! Is it going to start? Is it going to blow up when it starts? Am I wasting my money? But when it starts and you hear the rotary's song there is nothing sweeter! Once again Way To Go!
#36
Rotary Enthusiast
Join Date: Aug 2001
Location: Tallahassee, FL
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
Hhahahahaha! Listen to the Canuck accent!
No, congrats, Aaron - it looks good and sounds better! Welcome to Club Boost - once you've been a member, you'll never want to go back. Oh yeah!
:cheers:
Brandon
No, congrats, Aaron - it looks good and sounds better! Welcome to Club Boost - once you've been a member, you'll never want to go back. Oh yeah!
:cheers:
Brandon
#37
Rotary Freak
I wonder how much power you are putting out.
Can I get a list of mods?
Is your w/g ported?
How are you looking at your a/f ratios? Stock O2 sensor or wideband?
Mad props dude!
Can I get a list of mods?
Is your w/g ported?
How are you looking at your a/f ratios? Stock O2 sensor or wideband?
Mad props dude!
#39
AKA Poindexter
iTrader: (2)
Join Date: Apr 2001
Location: Austin, TX; JABLAM!, WA; Iraq
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RETed
No it doesn't - it's a stubborn SOB.  I've gone through that + the write-up on the Net about how to remove it, and oddly enough it always seem to pop back on (coming through something else?).  I regularly check the system registry with RegEdit, and that **** pops back on almost regularly almost every month...
-Ted
No it doesn't - it's a stubborn SOB.  I've gone through that + the write-up on the Net about how to remove it, and oddly enough it always seem to pop back on (coming through something else?).  I regularly check the system registry with RegEdit, and that **** pops back on almost regularly almost every month...
-Ted
basic divx bundle- free, no spyware
Divx Pro bundle- Free, but you have to put up with spyware
divx pro bundle with no spyware- you gots to dish out the cash.
the basic divx bundle will work for anybody that is just needing the codec so they can watch the videos, but if you want the shiny bells and whistles, you are outta luck, unless you want to shell out some cash(well, plastic actually)
#40
Engine, Not Motor
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
I would produce a kit, but no one would buy it...And I don't want to be stuck doing tech support.
The complete mod list can be found in my signature below. Yes, I realise I have to change the graphic.
The complete mod list can be found in my signature below. Yes, I realise I have to change the graphic.
#41
Senior Member
Join Date: Oct 2001
Location: dallas,texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Gotta ask this question.
At the end of the 3rd video what are you drinking...if that's you.
I saw that now I want the whole story..yah the car video part was interesting....but what was in that dang blender?
Haha Bet you didn't notice that. Better than a homemade video of something else that we don't want to see haha.
At the end of the 3rd video what are you drinking...if that's you.
I saw that now I want the whole story..yah the car video part was interesting....but what was in that dang blender?
Haha Bet you didn't notice that. Better than a homemade video of something else that we don't want to see haha.
#42
Engine, Not Motor
Thread Starter
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
The last frame in the video was left in by mistake. It was a commercial that my brother did for some class in high school...Don't remember exactly what was in the blender, but it was supposed to be some nasty drink.
#46
Information Regurgitator
Good job.Ive been wanting ot do a TII conversion on my car someday,but seeing what you've done might just persuade me to turbocharge the n/a motor.Someday one way or the other I'll have boost.
#47
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Join Date: Jun 2001
Location: London, Ontario, Canada
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
When you say you light up the tires in second, do you mean immediately after the gear change, or could you let the revs climb high and floor it, resulting in ripping the tires loose?
Hey Yanks, do you seriously hear a canuck accent on Aaron?
Hey Yanks, do you seriously hear a canuck accent on Aaron?
#48
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 31,145
Received 2,799 Likes
on
1,981 Posts
Originally posted by Snrub
Hey Yanks, do you seriously hear a canuck accent on Aaron?
Hey Yanks, do you seriously hear a canuck accent on Aaron?
mike
#49
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Originally posted by Felix Wankel
On a side note, your head doesn't flop like the Canadians on South Park. What gives?
On a side note, your head doesn't flop like the Canadians on South Park. What gives?
Congratulations, and I'll get the videos some day, maybe tonight if I don't sleep all night instead of just a short nap me need nap
I'll make fun of you in your video later
Good job and enjoy the backfiring and asskicking!