2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Turbo Coated in Oil (Plus more questions)

Thread Tools
 
Search this Thread
 
Old 09-18-03, 06:55 PM
  #1  
So close to 12's!!!

Thread Starter
 
Join Date: Aug 2003
Location: Canada
Posts: 395
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Turbo Coated in Oil (Plus more questions)

1.) The turbo on my car (87 TII) is covered in oil, from back to front. WTF is going on here? The line under the turbo seems to have fresh oil on it, and alot of build up. (is this the main oil line/)

2.) The intercooler pipe (closest to the firewall, goes straight down) Also has oil on it. its like seaping through the connector and hose.

3.) Car ******* stinks like fuel after a WOT run. I am also getting poor gas mileage. Could this be an o2 seosor? or something more serious?

4.) When i'm in 4th gear at low revs (Around 2K) The car will start bucking back and forth and make loud clunking noises. What is this?

Thanks for helping a n00b out

-ryan-
Old 09-18-03, 07:35 PM
  #2  
In Full Autist Cosplay

iTrader: (1)
 
Black13B's Avatar
 
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes on 0 Posts
Closely inspect/replace all your turbo oil lines. Do you get alot of smoke out the exhaust? At any time?

If your car stinks like fuel, CHECK YOUR PULSATION DAMPENER ASAP. Many guys have had fires in their FC3S' due to a PD failure. Number one symptom of a failed PD is the smell of fuel.
Old 09-18-03, 07:38 PM
  #3  
W. TX chirpin Monkey

 
fastrotaries's Avatar
 
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes on 0 Posts
i would remove the I/C and inspect for leaking oil, fuel, especially out the Fuel rail, and the PD. check for leaking injector grommets. It's not uncommon for the oil line (to and return) to the turbo leak.
Old 09-18-03, 08:09 PM
  #4  
So close to 12's!!!

Thread Starter
 
Join Date: Aug 2003
Location: Canada
Posts: 395
Likes: 0
Received 0 Likes on 0 Posts
i get no smoke at all cept a tiny tiny bit on start up. and where is the pd (sorry still a n00b to teh fc's)


thanks guys
Old 09-18-03, 08:14 PM
  #5  
Daily Domestic Killer

 
BlackRx7's Avatar
 
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes on 0 Posts
Sounds like your turbo oil seals need to be repalce, you can get a rebuilt kit for the turbo at www.turbocity.com
Old 09-18-03, 09:15 PM
  #6  
So close to 12's!!!

Thread Starter
 
Join Date: Aug 2003
Location: Canada
Posts: 395
Likes: 0
Received 0 Likes on 0 Posts
damn, is that a difficult job?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
FD7KiD
3rd Generation Specific (1993-2002)
15
02-26-21 10:12 PM
Professorpeanutrx7
New Member RX-7 Technical
5
08-15-15 01:38 PM



Quick Reply: Turbo Coated in Oil (Plus more questions)



All times are GMT -5. The time now is 04:16 PM.