2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

TII is hesitating (not 3800rpm related)

Thread Tools
 
Search this Thread
 
Old 12-17-02, 02:04 AM
  #1  
Im a tall midget.
Thread Starter
iTrader: (28)
 
Juan's Avatar
 
Join Date: Feb 2001
Location: So Cal, USA
Posts: 3,131
Likes: 0
Received 6 Likes on 5 Posts
TII is hesitating (not 3800rpm related)

I did a search and most of the results were 3800rpm related. My hesitation is a bit different. This happens in everygear. If I'm cruising and suddenly floor the gas pedal, the car would "bog/hesitate" for a second then the power will kick in and the car would take off like crazy. I recently adjusted the TPS using the light method hoping that it would fix the problem. If I slowly floor the gas pedal, the car will not do this.

My boost sensor line doesnt have the pill, since the car and engine didnt have this line connected (was replaced with silicon line). Could this be the culprit?


My car's info:
1988 TII with about 105k on the engine and 61k on the chassis. The car has fresh oil w/OEM oil filter, new NGK spark plugs, and stock? blue NGK plug wires (61k miles on them).

Mods:
- TID Mod w/cone intake
- TB Mod
- Bonez DP (eliminates pre-cat)
- Blitz SS BOV
- ACV, EGR blocked off.
- Stock main cat & exhaust (61k miles on them)
- Ported wastegate.
- FCD
Old 12-17-02, 02:21 AM
  #2  
Super Raterhater
Tenured Member 20 Years
iTrader: (6)
 
SonicRaT's Avatar
 
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes on 3 Posts
Yes, without that pill it'll render those symptoms. I've read numerous posts about it and they all had the same outcome, hesitation/bogging, some it's more extreme on, and others it's less.
Old 12-17-02, 02:29 AM
  #3  
Im a tall midget.
Thread Starter
iTrader: (28)
 
Juan's Avatar
 
Join Date: Feb 2001
Location: So Cal, USA
Posts: 3,131
Likes: 0
Received 6 Likes on 5 Posts
hmm... I'm guessing the pill is exactly the same for n/a and turbo? If so, I'll head over to the local junkyard and get one. Is the pill on the manifold side of the line or on the boost sensor end?
Old 12-17-02, 02:31 AM
  #4  
Super Raterhater
Tenured Member 20 Years
iTrader: (6)
 
SonicRaT's Avatar
 
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes on 3 Posts
I'm not positive on this, been almost 3 months since I looked at it, but I believe it's on the manifold side. I'm pretty sure they are the same (though I've never seen them both).
Old 12-17-02, 03:01 AM
  #5  
Im a tall midget.
Thread Starter
iTrader: (28)
 
Juan's Avatar
 
Join Date: Feb 2001
Location: So Cal, USA
Posts: 3,131
Likes: 0
Received 6 Likes on 5 Posts
I'll find out tomorrow if its not raining and the junkyard is open. Thanks for the help. I'll update this page after I install the pill. Thanks
Old 12-17-02, 03:47 AM
  #6  
just dont care.

iTrader: (6)
 
jacobcartmill's Avatar
 
Join Date: Jul 2002
Location: Nashville, TN
Posts: 9,387
Likes: 0
Received 4 Likes on 4 Posts
Re: TII is hesitating (not 3800rpm related)

Originally posted by wan

My boost sensor line doesnt have the pill, since the car and engine didnt have this line connected (was replaced with silicon line). Could this be the culprit?
yes.
Old 12-17-02, 03:51 AM
  #7  
Super Raterhater
Tenured Member 20 Years
iTrader: (6)
 
SonicRaT's Avatar
 
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes on 3 Posts
A little late on the reply their jacob?
Old 12-17-02, 03:55 AM
  #8  
just dont care.

iTrader: (6)
 
jacobcartmill's Avatar
 
Join Date: Jul 2002
Location: Nashville, TN
Posts: 9,387
Likes: 0
Received 4 Likes on 4 Posts
yeah i'm worthless.

and i want to change the damn title on my avatar. the funny part is, i've only been on this forum since like early july of this year... does that mean i'm a post-bitch?
atleast all of them have been in the 2nd gen section
Old 12-17-02, 03:57 AM
  #9  
just dont care.

iTrader: (6)
 
jacobcartmill's Avatar
 
Join Date: Jul 2002
Location: Nashville, TN
Posts: 9,387
Likes: 0
Received 4 Likes on 4 Posts
you know, i was in massachusetts last summer. we went on a ******* hellride to sell some teenager my 1990 300zx. worcester is where he lived, up there by holden. damn i hate those accents up there yall need some country accents
Old 12-17-02, 05:18 AM
  #10  
Super Raterhater
Tenured Member 20 Years
iTrader: (6)
 
SonicRaT's Avatar
 
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes on 3 Posts
I'm a michigan native myself, and I don't have the accent yet, thank god. If the restrictor pill doesn't solve your problem, you can reground the pressure/boost sensor since the original one sucks.
Old 12-17-02, 06:07 AM
  #11  
Moderator

iTrader: (1)
 
silverrotor's Avatar
 
Join Date: Mar 2002
Location: Toronto, Corporate Canada
Posts: 7,592
Received 5 Likes on 5 Posts
I don't have the pill In the Pressure/Boost Sensor In my Vacuum Line due to me changing them with Silicone ones. What can I say? I forgot to swap It over. I could verify that I have no bogging whatsoever.
Old 12-17-02, 06:26 AM
  #12  
Super Raterhater
Tenured Member 20 Years
iTrader: (6)
 
SonicRaT's Avatar
 
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes on 3 Posts
Then you're one of the lucky ones.
Old 12-17-02, 07:13 AM
  #13  
Moderator

iTrader: (1)
 
silverrotor's Avatar
 
Join Date: Mar 2002
Location: Toronto, Corporate Canada
Posts: 7,592
Received 5 Likes on 5 Posts
I should also mention that I added a 4 Gauge Ground from the Battery, directly to the stock Engine Ground, the one to the back of the Engine, below the Oil Filter and am certain this curtailed the hesitation.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
10-29-15 06:47 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
09-27-15 09:59 AM
MidnightOwl
2nd Generation Specific (1986-1992)
1
09-25-15 10:24 PM



Quick Reply: TII is hesitating (not 3800rpm related)



All times are GMT -5. The time now is 03:17 AM.