tid with 2 90 degree mandrel bends?
02-15-06, 05:42 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: so cal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
tid with 2 90 degree mandrel bends?
I was wondering if 2 90 degree sections of mandrel bends connected together (welded or silicone coupled) would work well as a tid? What about 2 45 degree sections?
02-16-06, 04:49 AM
#3
Junior Member
Thread Starter
Join Date: Jan 2006
Location: so cal
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Heres a graphical representation. I need it to be level and facing forward so that I can use the vinspeed intake heat shield.
Last edited by ucbfc; 02-16-06 at 04:52 AM.
02-16-06, 05:10 AM
#4
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
You will need two quite sharp bends to be able to do that and still fit everything in. Most of the gains from this mod come from removing the two restrictive bends in the stock TID.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Spirit Rx-7
Suspension/Wheels/Tires/Brakes
6
03-14-16 12:36 PM
Wicked93gs
2nd Generation Specific (1986-1992)
42
10-07-15 11:58 PM
