2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Ticking noise under boost....

Thread Tools
 
Search this Thread
 
Old 07-27-06 | 01:16 PM
  #1  
Archangels's Avatar
Thread Starter
- Make Haste -

 
Joined: Apr 2005
Posts: 1,648
Likes: 0
From: Calgary, Alberta
Exclamation Ticking noise under boost....

This is my last issue with the car, i dont remember making a specific thread concerning it so i thought i would make one....

it makes a weird ticking noise under boost in the higher gears, the car was on the dyno a few times, it ran a solid 11.5:1 AFR, nothing changed when the noise happened, infact i have a video of the noise....

http://members.shaw.ca/matrix9eleven/Badrun1.divx

it's happened numerous times already, atleast 30times, i recall reading that if it was pinging my motor would have been done ages ago, the noise only happens when i'm near WOT or at WOT on my car....

here's a list of my mods incase anyone needs them....

Mods:

- S4 Block with S5 Externals
- 3" Racing Beat Turbo-Back Exhaust
- S5 Polished Turbo With Massive Ported Wastegate
- Blitz DD BOV
- Coilovers ( Tein rear, Ground Control front )
- Centerforce Dual-Friction clutch
- HKS PFC F-Con
- HKS GCC
- Knights Turbo-Timer
- Knights FCD
- FD Flywheel
- Racing Beat Swaybar Kit
- JDM Brake Balancer
- Stainless-Steel Braded Brake Lines
- Autometer boost and A/F guages
- MazdaSpeed steering wheel
- MazdaSpeed racing pedels
- Manaray 6spoke 16" rims
- K&N Filter on 3Inch TID
- Yokohama AVS ES100 Z-Rated rubber
- Greddy ProfecB SpecII Boost controller
- Walbro 255lph Fuel Pump
- Full Custom Grounding Kit
- Greddy Vspec FMIC
- MSD 8.5cm Race-Wires
- Megan Front Strut-Tower Bar
- Megan Rear Strut-Tower Bar
- Denso 720cc Secondary's


i did however spin out one time in a corner, i didnt hit anything just spun a complete 360 and drove off, this was atleast a year ago and the noise has been there ever since that happened....

i'm stumped on this one, and so is everyone else, it almost sounds external or un-related to the engine to some degree because even when the noise happens, the engine revvs fine....

thanx for your help....
Old 07-28-06 | 02:15 AM
  #2  
Archangels's Avatar
Thread Starter
- Make Haste -

 
Joined: Apr 2005
Posts: 1,648
Likes: 0
From: Calgary, Alberta
any chance this noise could be one of the bearings inside the tranny going bad?...

the clutch?...

pressure plate?...

anyone?...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
6
07-01-17 12:30 AM
Linda_Lovelace
General Rotary Tech Support
0
09-18-15 11:04 PM




All times are GMT -5. The time now is 01:23 AM.