2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

theft deterrent mode HELP!!!

Thread Tools
 
Search this Thread
 
Old 06-10-09 | 09:22 PM
  #1  
gaijinrx7's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Sep 2007
Posts: 283
Likes: 0
From: maryland
theft deterrent mode HELP!!!

I have a 90 fc and my car is stuck in theft deterrent mode and no matter what i do it will not stop. How can i reset or stop this ****??? For background info, and please no flaming i am already beyond happy, i am wiring in my msd for my sbc and tied in my key on at a black and red wire then all hell broke loose. Any help is greatly appreciated!
Old 06-10-09 | 09:25 PM
  #2  
Pattsy's Avatar
Full Member

iTrader: (1)
 
Joined: Dec 2002
Posts: 138
Likes: 0
From: Richmond, VA
Have you disconnected the battery yet?
Old 06-10-09 | 09:28 PM
  #3  
papiogxl's Avatar
What's the point??
iTrader: (6)
 
Joined: Oct 2005
Posts: 995
Likes: 0
From: Omaha, NE
IIRC you need to use the key to open the hatch.
Old 06-11-09 | 12:03 AM
  #4  
rotarygod's Avatar
Rotors still spinning
iTrader: (1)
 
Joined: Jul 2002
Posts: 4,181
Likes: 20
From: Houston
The security system ecu is located behind the driver's side kick panel. Just unplug the harness. It'll quit. Nothing else is affected. Mine no longer works either and that's all I had to do.
Old 06-11-09 | 12:10 AM
  #5  
daviddeep's Avatar
Rotary Powered Since 1995
iTrader: (4)
 
Joined: Nov 2003
Posts: 1,178
Likes: 2
From: Potomac, MD
Originally Posted by papiogxl
IIRC you need to use the key to open the hatch.
Turning the key in the hatch or either door lock will reset the factory security system if everything is in good working order.
Old 06-11-09 | 09:57 AM
  #6  
rotarygod's Avatar
Rotors still spinning
iTrader: (1)
 
Joined: Jul 2002
Posts: 4,181
Likes: 20
From: Houston
Mine didn't. I couldn't get it to go off. That's why I had to disconnect the alarm ecu. I suspect that's what's happening to him too.
Old 06-11-09 | 10:34 AM
  #7  
gaijinrx7's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Sep 2007
Posts: 283
Likes: 0
From: maryland
tried putting key in door, opening hatch, unplugging theft ecu none of it worked. i will try again though
Old 06-11-09 | 11:36 AM
  #8  
rotarygod's Avatar
Rotors still spinning
iTrader: (1)
 
Joined: Jul 2002
Posts: 4,181
Likes: 20
From: Houston
If you really did unplug the anti theft ecu, I would have shut off as there is nothing to tell it to stay on at that point. Make sure you unplugged the correct connector.
Old 06-11-09 | 11:14 PM
  #9  
gaijinrx7's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Sep 2007
Posts: 283
Likes: 0
From: maryland
thanks, i got it. the battery was low and i had a bad main ground after i relocated the battery
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
164
03-08-20 09:00 PM
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 01:03 PM
gfd263
Megasquirt Forum
1
08-28-16 09:58 PM
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 10:33 AM




All times are GMT -5. The time now is 07:21 PM.