TB Mod now engine misfire???
#1
Full Member
Thread Starter
Join Date: Nov 2002
Location: buffalo,ny
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
TB Mod now engine misfire???
ok last night i removed the secondary plates from my TB and i noticed a real nice increase in throttle response but when i listened to my engine idle it sounded like it was misfiring. i would hear like little pops ever few seconds. the car used to do this when it was warming up but then would stop once it warmed up and now it does it all the time. what would cause this? Also i'm not sure if this is normal or not but my car idles at like 2100rpm and slowly as it warms up goes down and then stayes at a 1000rpm idle. Is there anything wrong with that alos or is it normal?
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
You probably have a small vac leak.
(I have a big/intermittant vac leak)
Some day I may actually find it.
In the sound clip in my sig, you can hear it idle at 7-800 when I first start it. After I blip the throttle, it idles at 1000..
(I have a big/intermittant vac leak)
Some day I may actually find it.
In the sound clip in my sig, you can hear it idle at 7-800 when I first start it. After I blip the throttle, it idles at 1000..
Last edited by SureShot; 03-27-03 at 01:09 PM.
#5
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Originally posted by SureShot
In the sound clip in my sig, you can hear it idle at 7-800 when I first start it. After I blip the throttle, it idles at 1000..
In the sound clip in my sig, you can hear it idle at 7-800 when I first start it. After I blip the throttle, it idles at 1000..
The engine was already warmed up when I started it.
Sorry about the incomplete info..
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM