Taking out wiring harness ???
02-22-02, 10:54 PM
#1
Rotary Freak
Thread Starter
Taking out wiring harness ???
I replaced my fuel side wiring harness. Now its time for the body harness or the one thats connected to the coils.. U know. Well anyways I will be taking it out soon and wanted to know a few pointers. I know how to take out all the crap from the engine side but when it goes into the floor erea I get lost. I have not tried it yet but It looks like it connects to the ECU and midway , it connects to the AC right in back of the logicon. I really dont think I need to take the dash out so if anyone has done this please help me. If it helps I will not have any carpet or flooring in a couple of days...
02-23-02, 02:44 AM
#2
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
here's a pointer - the wiring that goes along the passengers side of the car and connects to all the relays etc behind the passngers side kick panel, is BOLTED to the firewall BEHIND the heater box 
have fun
i have just finished stripping the interior outta my 2nd T2
have funi have just finished stripping the interior outta my 2nd T2
02-23-02, 10:40 AM
#3
Full Member
Join Date: Aug 2001
Location: Somewhere
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
I'm in the process of changing the wire harness that goes to the passenger side kick panel. Actually I just started and came in because it started raining ..... The top of my engine is striped so that part is no big deal. I have the kick panel off and have 4 of the 5 interior plugs unplugged but the one that is furthest back near the firewall is being a bitch. When it stops raining I'm gonna go out and try again on that last plug and hopefully pull the harness out through the firewall.
02-23-02, 11:23 AM
#4
Full Member
Join Date: Aug 2001
Location: Somewhere
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Ok ... I just got that last connector unplugged. I was able to slide it right through the firewall! I got lucky and didn't have any bolts holding it to the firewall behind the dash! 
02-24-02, 01:33 AM
#5
Rotary Freak
Thread Starter
Right on.... I just got done taking out the carpeting in the 89GXL. Easy just got hard right by were the stereo ash try is so I left that little piece under thier and cut it off with a knife. Anyways whats up with all that hard foam. I peeled some off and turned to charcoal crap. Is thier an easy way to take this crap off. How much weight. 30 pds???
I also noticed that the driver side seat weighs almost 40pds and the passenger side seat like 33pds. They are so freaking heavy. cant waite to get racing seats.
I also noticed that the driver side seat weighs almost 40pds and the passenger side seat like 33pds. They are so freaking heavy. cant waite to get racing seats.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
