T2,Ceramic Apex seal,street port,bov,intercooler, blah blah blah
#26
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
RX-7 Specialties almost ALWAYS builds their engines with 3MM seals. No one knows why really...I would assume they just want the customer to spend more money, or use worn out rotors.
And that said "high 300s"? I thought it said "low 300s". You're looking at least a turbo upgrade (take your pick....) and MORE fuel. At this point, it would also be a very wise move to go to a standalone EMS.
And that said "high 300s"? I thought it said "low 300s". You're looking at least a turbo upgrade (take your pick....) and MORE fuel. At this point, it would also be a very wise move to go to a standalone EMS.
#28
Drive, break, fix, repeat
Thread Starter
Join Date: Sep 2004
Location: canada
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
thanks man. i freakin love my car i just cant stop putting money into it. haha
i was looking at the MicroTech LTX-8s ECU. anyone have have experience with this? any other suggestions?
i was looking at the MicroTech LTX-8s ECU. anyone have have experience with this? any other suggestions?
#31
I'm with stupid -----^
Join Date: Mar 2001
Location: Calgary, AB, Canada
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
It would be nice to see another high powered FC on the streets of calgary.. however, unless you know what the hell you are doing, know what you need and don't need and how they work, and not depend on what someone else tells you that you need, nor their promise that they can tune your car to make that kind of power, I doubt you will ever see anywhere close to the power you are asking for...
I can assure you.. There are only a handful of FC's in calgary that are making 375 rwhp and up with proof (dyno/time sheets) .. .and none of those vehicles came out of rx-7 specialties..
I can assure you.. There are only a handful of FC's in calgary that are making 375 rwhp and up with proof (dyno/time sheets) .. .and none of those vehicles came out of rx-7 specialties..
#32
I dont see why there would be anything wrong with going with ceramic apex seals if he can afford it now, why not? You upgrade as you like knowing you have good apex seals to start..
#33
Lives on the Forum
Originally Posted by kevlar999
I dont see why there would be anything wrong with going with ceramic apex seals if he can afford it now, why not? You upgrade as you like knowing you have good apex seals to start..
Ceramic apex seal give you marginally better resistance to detonation.
Ceramic seals will absolutely kill all internal components when they do let go.
With that said, is it worth the 4x price of the stock OEM Mazda units?
Most people will agree it's not.
-Ted
#35
Wait...am I missing something? This looks like a case of modding without doing any research. You spent all that money on useless ceramic seals, and you still have a stock turbo. You can't run the stock turbo at 13PSI for long, and even if you did run it at 13 PSI, you would be lucky to make 250 RWHP. If you want high 300's, you need at least a BNR Stage IV turbo and bigger injectors than just 720 secondaries.
-Joe
-Joe
#36
NASA geek
iTrader: (2)
There isn't a damn thing wrong with this guy using ceramic seals. Ceramics are MUCH MUCH easier on rotor housings and are more then just marginally better at handling detonation, especially 3mm. Does it make it bomb proof? HELL NO, but if intends to keep this engine a very long time and doesn't make any huge tuning mistakes, this motor will last longer then a standard 2mm stocker as long as the side, corner, oil seals etc last and things were properly clearanced. Even if they weren’t clearanced properly and he will need a rebuild in the future, his rotor housings and apex wont need replacing (again, if there was no tuning mistakes or lack or oil). He's doing things fine, not everyone can build a 10 second terror all at once. He has a good basis for HEAVY mods later when he has more money and the right parts (bigger turbo, all the piping and fuel).
My $0.02, I say lay off the kid and congratulate him on a damn good start.
~Mike.................
My $0.02, I say lay off the kid and congratulate him on a damn good start.
~Mike.................
#37
I'm not saying that ceramic seals are bad, I just think that they were a waste of money for someone shooting for the 300 HP range and that the money could have been spent much more wisely.
-Joe
-Joe
#38
Originally Posted by Bukwild
"There are only a handful of FC's in calgary that are making 375 rwhp"
and get to use it what 3 months out of the year?
and get to use it what 3 months out of the year?
More like 8 months Rick James.......whatever difference that makes to you??
#39
Brother of the Rotary
iTrader: (2)
^My car gets stored in its own Igloo, next to the dogsled. Dogsleds have to be the best winter beater, because the added benifit is that we can eat the transportation during our 9 month winters, should we need to. So the sled gets a little slower if we lose a dog or two....
#40
Full Member
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RETed
Ceramic seals will absolutely kill all internal components when they do let go.
i knew there was a little red flag that went up in my head when people started talking about how good ceramic seals are.
yep, RE's right, if they go, look at buying new housings etc.
#41
Drive, break, fix, repeat
Thread Starter
Join Date: Sep 2004
Location: canada
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
thanks RacerXtreme7, its good to hear that i havent wasted my money. lol i am kinda new at this.
as for the turbo. i plan on upgrades.... looots of upgrades. i just dont have the 12,000 in my pocket to buy it, and everything else that would entail(ems,clutch,injectors,new set of tires every month) so im building it slowly.
thanks for all the helpful info guys
as for the turbo. i plan on upgrades.... looots of upgrades. i just dont have the 12,000 in my pocket to buy it, and everything else that would entail(ems,clutch,injectors,new set of tires every month) so im building it slowly.
thanks for all the helpful info guys
Thread
Thread Starter
Forum
Replies
Last Post