2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

swap question

Thread Tools
 
Search this Thread
 
Old 03-22-08, 02:21 AM
  #1  
Full Member
Thread Starter
 
89rx7vert's Avatar
 
Join Date: Dec 2007
Location: rialto
Posts: 163
Likes: 0
Received 0 Likes on 0 Posts
swap question

i am swaping out my engine of my 89 vert
a friend is selling me a 13b street portet with 12a internals
the 13b came of a 87 and the internals came of a 85
should i have eny problems taking out my s5 engine
and putting this one in one that came out of a 87?
do i have to modify enything?
im getting the engine for 600 buckz
good or naw?

help please

-joe
Old 03-22-08, 02:40 AM
  #2  
I blame the TPS

 
Chris Boots's Avatar
 
Join Date: Dec 2004
Location: MT
Posts: 459
Likes: 0
Received 0 Likes on 0 Posts
What 12A internals are you talking about. They can't be anything on the rotors cause the 12A's are different than the 13B's in size. So nothing like the apex seals or pretty much any seal came out of the 12A...Maybe the 1985 internals are from the GSL-SE engine which was a 13B. Your stock S5 NA engine put down 160 from factory and I'm thinking a stock S4 street port might do the same. The S5 engines were lighter on the inside for one thing and the S4 engine will have heavier internals. So its a tough call. If you put everything on you S5 NA on this S4 NA you might see 165hp but no real improvements. Oh this engine will get worse gas mileage though because of the street port... it might be worth it if the engine you're getting has very low mileage. Well I don't know if its a good deal or not.
Old 03-22-08, 02:52 AM
  #3  
Full Member
Thread Starter
 
89rx7vert's Avatar
 
Join Date: Dec 2007
Location: rialto
Posts: 163
Likes: 0
Received 0 Likes on 0 Posts
im not sure he said it has 12a internals
i guezz they might be of a gsl-se
i dont really care too much about the power or the gas
i just need to replace the blown one of my s5...
but i just need to know if u would need to do eny modifications
to my vert..
or can i just drop the engine from the 87 strait in???
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
bb6guy
Old School and Other Rotary
10
10-01-18 08:07 AM
OrangeMax
New Member RX-7 Technical
3
09-04-15 10:42 AM
RotaryBobby
1st Generation Specific (1979-1985)
2
08-29-15 10:32 AM
Professorpeanutrx7
New Member RX-7 Technical
5
08-15-15 01:38 PM



Quick Reply: swap question



All times are GMT -5. The time now is 05:22 AM.