2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

stupid question (sorry sometimes I'm retarded)

Thread Tools
 
Search this Thread
 
Old 11-05-03, 08:29 PM
  #1  
spending too much money..

Thread Starter
iTrader: (2)
 
hondahater's Avatar
 
Join Date: Dec 2002
Location: louisiana
Posts: 10,117
Likes: 0
Received 1 Like on 1 Post
stupid question (sorry sometimes I'm retarded)

Does oil also go through the intercooler? I'm trying to find if there is any boost leak through my front mount intercooler however when taking apart my ic tubing all the tubing have oil inside it, is this good? I know our turbo's are cooled by oil but.....I don't know.
Old 11-05-03, 08:58 PM
  #2  
Alcohol Fueled!

iTrader: (2)
 
J-Rat's Avatar
 
Join Date: Jan 2002
Location: Hood River oregon
Posts: 11,093
Likes: 0
Received 2 Likes on 2 Posts
The oil in your intercooler is coming from your turbo. Stock turbo I assume?
Old 11-05-03, 09:00 PM
  #3  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 20 Likes on 20 Posts
sure its the intercooler and not the oil cooler???

Had to ask, because you posted
sometimes I'm retarded
Old 11-05-03, 09:04 PM
  #4  
spending too much money..

Thread Starter
iTrader: (2)
 
hondahater's Avatar
 
Join Date: Dec 2002
Location: louisiana
Posts: 10,117
Likes: 0
Received 1 Like on 1 Post
lol, very funny. No it is my intercooler. I can not find where my problem is I found a peice of intercooler toobing that was loose so I tightened it and still not alot of boost at all. I don't know whats wrong here.
Old 11-05-03, 10:58 PM
  #5  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
A thin layer of oil in the intake system is normal. It's from the PCV system.
Old 11-05-03, 11:06 PM
  #6  
...94% correct.

 
Makenzie71's Avatar
 
Join Date: Oct 2002
Location: High Texas
Posts: 1,283
Likes: 0
Received 2 Likes on 2 Posts
BUT if you're not boosting very much and you've got a SIGNIFICANT amount of oil in your IC plumbing then your turbo might be walking it's way out.
Old 11-06-03, 07:21 AM
  #7  
spending too much money..

Thread Starter
iTrader: (2)
 
hondahater's Avatar
 
Join Date: Dec 2002
Location: louisiana
Posts: 10,117
Likes: 0
Received 1 Like on 1 Post
no just a thin layer is on it so thats normal! just can't find where the turbo problem is. I"ve tried

1. took tid off and found no shaft play and spins freely
2. checked all hoses everything looks connected.
3. checked the wastegate actuator and it is not stuck
4. checked for boost leak from fmic tubes fixed on problem but still not alot of boost.
5. checked for vacuume leaks.

Anything else?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
stickmantijuana
3rd Generation Specific (1993-2002)
13
01-09-18 11:19 AM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: stupid question (sorry sometimes I'm retarded)



All times are GMT -5. The time now is 04:43 AM.