Stock tach/aftermarket coils
#1
Stock tach/aftermarket coils
I'm going to be running aem smart coils on a haltech elite 1500..someone told me the stock tach isn't going to work when not using the factory coils..this true? If so what needs to be done to supply the stock tach with a signal...ive searched but only found threads talking about how to set up a aftermarket tach with stock coils...
Thanks
Thanks
The following users liked this post:
TII777 (08-26-17)
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Tha haltech will supply the signal and the wire at the trailing coil needs to be fed that signal for the Tach.It is a single Bullet connector.