steering lock q....searched
#1
Junior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Aug 2005
Location: Denton
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
steering lock q....searched
ok, the ignition wont turn past acc, so I jiggle the steering wheel to get it unlocked. It will turn stop to stop in either direction, of course locking in the middle. My problem is that the ignition acts as if the steering lock is on when the its not. Still wont turn even at full steering to either direction. Ive moved that steering wheel in every direction, and the key just wont turn. Any ideas?
#4
Junior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Aug 2005
Location: Denton
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
So, obviously there is enough info on how to replace the ignition. But is there any links on how to remove/replace the steering lock mechanism? Thanks for your help icemark
#6
Senior Member
Join Date: Jul 2003
Location: Wayne, NJ 07470
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
One way to remove the steering interlock is to disassemble the interlock and reassemble the interlock with the steering shaft covered by a thin sheet of aluminum - like a soda can.
My race car can use the ignition switch as normal but the wheel will not lock in any position regardless of whether the key is in or out.
ed
My race car can use the ignition switch as normal but the wheel will not lock in any position regardless of whether the key is in or out.
ed
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM