2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

start motor rev's go stright to redline!!! help!

Thread Tools
 
Search this Thread
 
Old 02-21-03 | 03:33 AM
  #1  
importboi22's Avatar
Thread Starter
Hks Ownz Me (
 
Joined: Dec 2001
Posts: 1,489
Likes: 0
From: corona,CA
Exclamation start motor rev's go stright to redline!!! help!

ok so i replaced my lower intake manifold gasket and upper intake manifold gaskets... BTW are a big *** bitch .... Anyways when i start up the car its like i have the throttle to the floor is there any reason for this im thinking its prolly gonna be my Throttle body in which case i have a new one comin in the mail... but i was wondering if big vaccum leak could cause this? thanks
Old 02-21-03 | 03:52 AM
  #2  
importboi22's Avatar
Thread Starter
Hks Ownz Me (
 
Joined: Dec 2001
Posts: 1,489
Likes: 0
From: corona,CA
man this forum is weak sometimes!!
Old 02-21-03 | 03:59 AM
  #3  
importboi22's Avatar
Thread Starter
Hks Ownz Me (
 
Joined: Dec 2001
Posts: 1,489
Likes: 0
From: corona,CA
i was thinking the LED windsheild washers added too much horsepower with my Euroclear taillights and black strobe light inside are just overwhelmingly to powerful for my car
Old 02-21-03 | 04:11 AM
  #4  
kep0ne's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 298
Likes: 0
From: West Covina, CA
you dont need a new tb

check your throttle cable, make sure its not stuck on something. something is keeping your tb plates open.
Old 02-21-03 | 04:20 AM
  #5  
TonyTurboII's Avatar
Glock Lover
 
Joined: Mar 2001
Posts: 2,223
Likes: 0
From: Currently residing in St Charles, MO
Sounds like the throttle cable to me.
Old 02-21-03 | 04:24 AM
  #6  
importboi22's Avatar
Thread Starter
Hks Ownz Me (
 
Joined: Dec 2001
Posts: 1,489
Likes: 0
From: corona,CA
ight will check tomarrow... i hope my baby will work!!!!
Old 02-21-03 | 05:01 AM
  #7  
Kai's Avatar
Kai
Rotorphile.
 
Joined: Mar 2002
Posts: 1,296
Likes: 0
From: Richmond/NoVA
Could be a vac leak. When I replaced the injectors in my project Civic (gasp!) I accidentally left the PCV hose disconnected. Upon starting the car, it shot up to around 5.5k RPM. You might want to look out for broken or disconnected vac lines.
Old 02-21-03 | 05:40 AM
  #8  
Liquid Anarchy's Avatar
We come with the Hardcore
iTrader: (2)
 
Joined: Nov 2001
Posts: 2,456
Likes: 0
From: Springfield, MO
it's most likely something w/ the TPS or throttle cable. When my friend Brandon got his new engine, we drove down the road and his RPM SHOT up. After inspecting it, an interior clip had made it's way to the airbox (thanks to the people who installed it) and lodged itself in the TB. This messed w/ the TPS and it didn't like it.

In other words, check around the TB and look for anything out of the ordinary.
Old 02-21-03 | 05:54 AM
  #9  
Full Member

 
Joined: Nov 2002
Posts: 77
Likes: 0
From: riverside, ca
yeah throttle cable does sound suspect...cant think of anything that would make you rev up that fast and high. btw where in corona are you located? im in riverside, ca / corona hills area...we should get all the T2 in the area together...i just met a guy in san bernardino with a T2 also.
Old 02-21-03 | 12:31 PM
  #10  
saltlakebay's Avatar
Full Member
 
Joined: Jul 2002
Posts: 176
Likes: 0
From: Salt Lake City, Utah
* I know 89's have an electic oil meter pump, but do they still have the rod from the throttle go down to that area? I friend of mine had her OMP rod get hung up and it held the throttle open. *

Needless to say, she drove it home that way. Blew the engine and cooked the brakes.. heh heh.. some people..
Old 02-21-03 | 01:12 PM
  #11  
importboi22's Avatar
Thread Starter
Hks Ownz Me (
 
Joined: Dec 2001
Posts: 1,489
Likes: 0
From: corona,CA
im just off of the 91 W and 15S interchange i live off of ontario..... I dont mind meeting some other RX7 owners i usually help them out with there cars... Since i got a lift and air tools but pretty soon im gonna have to start charging nothing really big just use of tools and electricity anyways hit me up sometime if you wanna meet up... Maybe you can help me fix my car too
Old 02-21-03 | 02:45 PM
  #12  
importboi22's Avatar
Thread Starter
Hks Ownz Me (
 
Joined: Dec 2001
Posts: 1,489
Likes: 0
From: corona,CA
anyone wanna come down and help me out?!?!?! also anyone in socali have a good hook up on tires?!?!?!? any other ideas on what it could be?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
05-30-19 09:47 PM
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 10:24 AM
stickmantijuana
Microtech
30
04-23-16 07:37 PM
incubuseva
2nd Generation Specific (1986-1992)
14
09-03-15 01:37 PM
zuesskroph
2nd Generation Specific (1986-1992)
0
08-13-15 07:05 PM




All times are GMT -5. The time now is 03:17 AM.