2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Stalling

Thread Tools
 
Search this Thread
 
Old 04-23-05, 11:24 AM
  #1  
OK, next project...

Thread Starter
 
Ronald E. Jacques's Avatar
 
Join Date: Dec 2003
Location: Greenfield, Indiana
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Stalling

I've finally gotten my idle problems worked out. Installed new TPS and after struggling to adjust it the car now idles perfect, revs perfect, starts easily. Thank God.

Only problem remaining, when approaching a stop, if I clutch it while the revs are still high, like when going 50mph or so and the light suddenly goes red, the revs will drop so low that it sometimes stalls. This does not happen in lower gears when the engine is at low revs, only when the tach instantly drops from like 4000 or higher straight down to idle.

I've never had my injectors cleaned or flow checked and for all I know they are full of junk. Could that be it?

BTW I recently installed a light flywheel, but I had the problem before that.

Thanks.
Old 04-23-05, 01:42 PM
  #2  
Moderator

iTrader: (7)
 
hIGGI's Avatar
 
Join Date: Feb 2001
Location: Czech Republic [www.rx7cz.net]
Posts: 4,985
Received 17 Likes on 12 Posts
Try to adjust dashpot at TB, it might not be working properly and is there exactly for reasons to not let rpm's drop too fast.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
Einheri
Single Turbo RX-7's
14
10-07-15 12:23 PM
xXBrendanXx
Power FC Forum
6
09-17-15 10:10 AM
REX7&Z32TT
New Member RX-7 Technical
5
09-09-15 05:16 AM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: Stalling



All times are GMT -5. The time now is 06:10 AM.