prmazdarx7

anyone else have anything else to say about this project???

prmazdarx7

so many n/a people looking for more power and no body else going to put input to this threat????

Drakk0r

Seems that most people on these forums can afford a TII or a 3rd gen... Or were smart enough/lucky enough to get one in the first place. Those of us with modded N/A's have gone past the point of no return. I've put more money into my car to make it feel and handle right, that it'd cost me double what I've got into it to sell it and buy a TII, then do the same feel and handling mods to it. Not to mention, I love my car.. And could never sell it.. It'll be great day when I kill all the TII's around here with my weak little turbo N/A that cant handle the power of a turbo..... or whatever it is they all say...

Dak

I used to kick the idea around of doing a TII conversion on my car when this engine goes,and I still may.Right now I am thinking that maybe I will do what you speak of(put a turbo on a n/a) and run it that way untill it goes,the do the full TII conversion.I see no reason you can't put a turbo on a n/a as long as you get your air/fuel and your timing right.I think you would need the s-afc and the necessary gauges,injectors,fuel pump,etc.Also there is a company,I believe their name is J&S that makes a knock sensor that automatically retards the timing at the first hint of detonation(SCC had it on their 3rd gen project car) which might be a good thing seeing that one good ping is all it takes to break an apex seal.Good luck and let us know how it turns out.

tIIforever

i say go for it once got boost you'll never go back

T04FC

I agree

prmazdarx7

that it??? ok moderator close the threat and keep for god sake

aghoris

I was thinking of adding a powerdyne or vortech super to my n/a running a tII fuel pump and injectors. i was told mariah motorsports made a kit but i havent been able to find it on there page. any one know where i can get it... if not ill just make my own brackets...

Aaron Cake

iTrader: (1)

I have a lot of thoughts and info on this issue. I will post them when I have time.

RETed

You are correct.&nbsp I put my money that the MAJORITY of people in here are not capable of doing this or comprehending what you need to do to attain this kind of performance...



-Ted

RETed

LOTS of trash taking...
I hope I'm not one of your victims.&nbsp The ball-bearing 60-1 using an XS Engineering divided cast manifold should eliminate that possibility anytime in the near future.&nbsp If over 400hp to the wheels is not enough, then the 20B would be my trump card...



-Ted

Drakk0r

Haha.. I was refering to stock, or nearly stock TII's that some of my friends own. Not modded, fast *** TII's like yours. I never plan to have more than 210-230rwhp. I think that's attainable. Even for the likes of me... I'm not going for fast here.. I'm going for anything faster than my slow *** N/A. And since I cant afford a TII, I'm turboing my N/A. Any more power than 210-230 and I'd need a costom rebuild (TII housings, N/A rotors. Probably 3mm seals too... as well as other misc ****), bigger turbo, divided manifold, better fuel and ignition tuning (dyno tuning, not gauge tuning.. Can you say Haltech?), larger more efficient intercooler, larger injectors, additional injectors, additional injector controller, high pressure fuel pump, a good knock sensor to avoid detonation, and a TII driveline to handle the power. I'm sure I left out a lot, but my point is.. I know its easier and better to start with a TII if you want power. After this summer is over, I plan on joining the military. Then when I have my life set up and the money rolling in, I'll buy and mod a TII. Some of us just dont have the money for a new car, so we make do with what we got...

Angel Guard Racing Team

I own a 1987 GXL 13B 6 Port. I slapped a Turbo II T03 and the intercooler in it. the only thing that I changed was the secondary injectors. I am using from a 1984 GSL-SE they work just fine!!!!

Here in Puerto Rico is very easy to do whatever you want with a rotary engine, there are parts all over the place. We got a 1980 Full metal Mazda RX-7 running 8:32 @ 159 MPH. It needed bigger tires so times should improve we will be racing this weekend here in Puerto Rico against team USA.

KNONFS

iTrader: (14)

Otro boricua en la lista, esto se pone bueno!! Dese cuando tienesd el tuyo hecho turbo? Y sobre las piezas, yo nunca encontre una trans en buen precio

BTW - Bienvenido seas!!

prmazdarx7

puerto rico has the best rotary engines mechanics see my flag waving hehe to bad im not there now if i ever moved back im taking my gxl back overthere

names of puerto rico race drivers they are slow but can handle their own:

Abel Ibarra
and his partner i think his name is hector
or should i say flaco racing team sponsored by i cant remeber hehe

Angel Guard Racing Team

I used to live in Houston. I went to Elsik High School!!!!

Angel Guard Racing Team

Bueno el carro mio lo hizo un amigo. El es un buen mecanico, mi primo tiene un RX-7 que corrio 8:32 mondando gomas. Antes se llamaba Sander's Toy. Que transmision necesitas?

josh q

let me know if you get this turbo working I want to do this or a total swap, maybe a twin turbo jspec.

Angel Guard Racing Team

Well I use it everyday and it works just fine. Just have to use the top part of the turboII intake, the intercooler, factory Turbo and exhaust manifold 84 gsl-se injectors (for secondary). I am using the factory 6 port computer since I am only running the stock 7psi. Also if you wanna go higher than 8.9 psi on a turboII you must get a fuel cut-off. The TurboII computer is designed to cut-off fuel to secondary injectors at 8.9 psi, so in order to make the car belive that it is running less psi you must install a fuel cut-off, mazdatrix sells them. About the twin turbo, just get a 3rd gen engine. Actually they run better on single big Turbos. Twin would be better for 20B applications.