Six Speed Tranny??????
04-20-02, 07:45 AM
#26
Ok. The splits do look a bit better for 1-3 if you're running that kinda power. The only stock T56s that have the 1:1 5th are the early (93-94 F-Bodies). The rest have an overdrive 5th and .50 6th. The early tranny has quite a bit lower torque rating. And having had a couple later T56s, does a turbo rotary really make enough torque below 2000 rpm to use the 6th gear for cruising? When will you use it then? With a LT1 5th is good for around 150 mph. You've got more revs but less rear gear so it should be a wash. Do you really need to exceed 150?
Why not use the stock 5 speed and a taller rear gear? With the stock 4:10s your gonna blow the tires off in first gear no matter what trans you're using. Gear would be cheaper and easier.
Chris
Why not use the stock 5 speed and a taller rear gear? With the stock 4:10s your gonna blow the tires off in first gear no matter what trans you're using. Gear would be cheaper and easier.
Chris
04-20-02, 02:24 PM
#27
I wish I was driving!
When would I use it? TOP SPEED RUNS!
The lower gear ratio would allow me to hit top speed and not be 1000 rpms above redline.
As well, it would be easier to hit redline with an OD split (5th and 6th) than with just with a lower gear ratio in a Mazda 5 speed.
Make sense?
Sean Cathcart
The lower gear ratio would allow me to hit top speed and not be 1000 rpms above redline.
As well, it would be easier to hit redline with an OD split (5th and 6th) than with just with a lower gear ratio in a Mazda 5 speed.
Make sense?
Sean Cathcart
04-20-02, 06:45 PM
#30
Do I Really Exist?
iTrader: (2)
Join Date: Nov 2001
Location: London, ON
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Scott 89t2
the last question would be if the t56 can take 8000+rpm?...
the last question would be if the t56 can take 8000+rpm?...
05-11-02, 06:52 AM
#32
I wish I was driving!
Update!
OK, here is what I think I have figured out. The chevy version aftermarket BW T56 will bolt up to a stock chevy BW T5 housing.
The available adapter plates are for the ford version BW T5.
Since the BW T5 in the mustang was different then the BW T5 in the camaro, there is no way the available adapter plates will work.
Looks like I will be doing it custom after all....
Sean Cathcart
The available adapter plates are for the ford version BW T5.
Since the BW T5 in the mustang was different then the BW T5 in the camaro, there is no way the available adapter plates will work.
Looks like I will be doing it custom after all....
Sean Cathcart
05-11-02, 10:09 AM
#33
Do I Really Exist?
iTrader: (2)
Join Date: Nov 2001
Location: London, ON
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that sucks... 
You couldnt find an adapter plate for the chevy one?
Someone should make one, I mean they make one for the ford, why not the chevy?
I'll have a look around, see if I can find anything at all for yah.
You couldnt find an adapter plate for the chevy one?Someone should make one, I mean they make one for the ford, why not the chevy?
I'll have a look around, see if I can find anything at all for yah.
Thread
Thread Starter
Forum
Replies
Last Post
ricardo.benin
3rd Generation Specific (1993-2002)
3
09-23-15 10:08 AM
